720160

Honda Miimo HRM40 Live Manual

15
Zoom out
Zoom in
Previous page
1/108
Next page
14 | English
Problem Possible Cause Corrective Action
Parts of the lawn
area left uncut
Mower requires more cuts to
finish garden
Allow mower to run for 3 full cuts to cover whole lawn
area.
Time slot not long enough for
garden size
Increase mowing time slot or use Honda “Smart Timer”
Calendar Function.
Distance between perimeter
wires too small
Increase distance between the perimeter wires to a
minimum of 75 cm.
Rough mowing conditions Select “uneven ground/low sensitivity” option from
menu item “lawn condition/bump sensor”.
Flatten garden/remove/bumps/mark out unsuitable areas
with the perimeter wire – Please follow the instructions
in the Installation Guide.
Grass too long Select “uneven ground/low sensitivity” option from
menu item “lawn condition/bump sensor”.
Slopes in garden too steep Ensure mower only operates on slopes of 15 degrees or
less and full garden is not on a slope.
Mower gets stuck in
garden
Objects/obstacles not marked
out
Use the perimeter wire to mark off obstacles where the
mower often gets stuck.
Newly laid turf Allow a few weeks for the soil to settle before using the
mower.
Select “uneven ground/low sensitivity” option from
menu item “lawn condition/bump sensor”.
After watering, wait as long as possible until you start
the mower.
Mower
unintentionally cuts
flowers, etc. or
runs over certain
obstacles
Objects/obstacles below 5 cm
not marked out
Mark obstacle using perimeter wire leaving 30 cm from
object or remove objects/obstacles.
Mower does not
appear to cut
logically
Map & Mow system depends on
the garden conditions. Mower
does not necessarily have to
continue in the next uncut area.
Further information can be found on the Installation
Guide.
If behaviour re-occurs often, remap garden.
Mower does not always go in
a straight line when travelling
between areas
No corrective action needed.
Mower frequently does not
find right position or turns on
the spot
Change wire ID.
Wire crossed while marking an
object
Follow instructions in the Installation Guide.
Mower runs in random paths
in an additional lawn without
docking station.
Normal behavior. The Map & Mow system only works in
areas with docking station.
Perimeter wire keeps
being cut
Wire is not taut between pegs
Distance between pegs is more
than 75 cm
Make wire taut and ensure distance between pegs is
maximum 75 cm. Follow instructions in the Installation
Guide. Use the wire connectors to repair the cut.
… 15 …


Need help? Post your question in this forum.

Forumrules
1

Forum

honda-miimo-hrm40-live

Reset search

  • Hi There.
    My Honda HRM won't pair with the phone and is no responsive. I'm being asked to press the blue button but nothing seems to happen.
    Thanks Submitted on 7-10-2021 at 17:03

    Reply Report abuse

    • Have you turned it on using the black rocker switch at the lower left rear of the machine. Is there anything on the display. The mower does not "pair" with the machine it connects to it via an app which you must download separately. Answered on 11-10-2022 at 08:45

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Miimo HRM40 Live at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Miimo HRM40 Live in the language / languages: English, German, Dutch, French, Italian, Swedish as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info