580721
49
Zoom out
Zoom in
Previous page
1/70
Next page
47
5 USAGE / 6 TROUBLESHOOTING
Before contacting your dealer / Messages
6
TROUBLESHOOTING
Before contacting your dealer
In the unlikely event that you are facing a problem and you need to contact your dealer, ensure that you
have the following information available.
Owner’s Manual
Consider any recent work in your garden.
[Fault History] information
Home screen J [5.History] J [2.Fault History]
Messages
If any of the following messages appear in the display, use this troubleshooting guide to address the
problem before contacting your dealer. If the problem persists, contact your dealer.
Message Cause Solution
Keypad
A button was pressed while the
lawnmower was running (with the
control panel cover closed).
Open the control panel cover and check if any
foreign objects are stuck inside.
If this message appears after removing any
foreign objects, contact your dealer.
ENT Key
The Enter button was pressed while
the lawnmower was running (with the
control panel cover closed).
No Operation:
An incorrect PIN (Personal
Identication Number) was input 3
times in a row.
Wait 5 minutes and input the correct PIN
(Personal Identication Number). If you forgot the
PIN, contact your dealer.
Clock Reset
The backup battery power has drained
during long-term storage. The clock
has been reset.
Set the current date and time. The time must be in
24-hour format.
If the clock cannot be set, contact your dealer.
Battery voltage
high
The battery charges too much. Remove the lawnmower from the docking station,
set the power to ON, and wait until the message
disappears.
If the message does not disappear, contact your
dealer.
Battery voltage
low
The battery does not charge enough. Charge the lawnmower with the docking station.
If the message does not disappear, contact your
dealer.
Battery Temp
high
The battery temperature is too high. Set the power to ON, and wait until the message
disappears.
If the message does not disappear, contact your
dealer.
Battery Temp low
The battery temperature is too low. Put the lawnmower in a place where the
temperature 5°C or higher, set the power to ON,
and wait until the message disappears.
If the message does not disappear, contact your
dealer.
Outside loop
The lawnmower exited the boundary
wire.
Move the lawnmower into the work area.
If the message does not disappear, check if
the boundary wire connectors are correctly
connected, and check if there are no similar
lawnmowers in the area.
If the message still does not disappear, contact
your dealer.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Miimo HRM300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Miimo HRM300 in the language / languages: English as an attachment in your email.

The manual is 14,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda Miimo HRM300

Honda Miimo HRM300 User Manual - German - 70 pages

Honda Miimo HRM300 User Manual - Dutch - 70 pages

Honda Miimo HRM300 User Manual - French - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info