580898
16
Zoom out
Zoom in
Previous page
1/128
Next page
16
ENGLISH
5. Loosen the top [3] and
bottom [4] drive clutch cable
locknuts with a 10 mm
wrench. Move the adjuster
[5] up or down, as required,
until the mower operates as
outlined in step 4. Tighten
the locknuts.
Throttle Cable Adjustment
1. Move the throttle lever [1] to the
fast position [2].
2. Remove air cleaner cover.
3. Check that the control
lever [3] just touches the
stopper screw [4]. If
adjustment is required,
proceed to step 5.
4. Loosen lock nuts [5] with
a 10 mm wrench. Move
adjuster [6] up or down as
required to achieve
clearance in step 3.
Retighten locknuts [5].
BLADE REMOVAL AND INSTALLATION
If you remove the blades for sharpening or replacement, you will need
a torque wrench for installation. Wear heavy gloves to protect your
hands.
BLADE SHARPENING: To avoid weakening the blades, or causing
imbalance or poor cutting, the blades should be sharpened by trained
staff at an authorized Honda dealer.
BLADE REPLACEMENT: Use Honda Genuine replacement blades or
their equivalent.
Blade Removal
1. HYEA: Put the throttle lever in the STOP position.
HZEA: Turn the key to the OFF position.
2. Disconnect the spark plug cap. Tilt the mower to the right so the
fuel cap is up. This will help prevent fuel leakage, motor oil seeping
into the air filter, and hard starting.
3. Use a 14 mm (6 point) socket wrench and remove the two blade
bolts [1] and special washers [2] from the blade control assembly
[5]. Use a wooden block to prevent the blades from turning when
removing the bolts.
4. Remove the upper [4] and lower blades [3].
Blade Installation
1. Clean dirt and grass from around the blade mounting area.
2. Install the blades [3] and [4] using the two blade bolts [1] and
special washers [2] as shown.
Be sure to install the special washers with the concave side toward
the blades and the convex side toward the head of the bolt.
The blade bolts are specially designed for this application and
must not be replaced with other bolts.
[3]
[4]
[5]
STOP
[1]
[4]
[3]
[5]
[6]
WARNING
Operating this mower with only one blade will result in an
improperly seated blade that can be thrown from the
mower and seriously hurt or kill someone.
Always use both blades as a set.
[1]
[2]
[3]
[4]
[5]
[3] [4]
[1]
[2]
[7]
[6]
00X39VH7 Y210.book Page 16 Thursday, May 30, 2013 2:17 PM
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HRX537 HYEA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HRX537 HYEA in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 26,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda HRX537 HYEA

Honda HRX537 HYEA User Manual - English - 23 pages

Honda HRX537 HYEA User Manual - German - 24 pages

Honda HRX537 HYEA User Manual - Dutch - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info