580909
17
Zoom out
Zoom in
Previous page
1/22
Next page
17
ENGLISH
CONTROL CABLE ADJUSTMENTS
Blade Control Cable
Measure free play at the top of the blade control lever [1], while
holding the button down. Free play should be 10 ~ 15 mm. If
adjustment is necessary:
1. Loosen the locknuts
[2] with a 10 mm
wrench, and move the
adjuster [3] up or
down as required.
2. Tighten the locknuts
and recheck free play.
3. Start the engine
outdoors, and operate
the blade control
lever. Check that the
blade starts when you
push the lever forward
and stops quickly
when you release the
lever.
If the blade does not
start or stop as it
should, with correct
cable adjustment,
take the mower to an
authorized Honda dealer for repair.
Drive Clutch Cable Adjustment
1. With the engine stopped,
position the control cable
bands [1] as shown.
2. Pull the shift lever all the
way back to the stop
position.
3. Start the engine and
move the throttle lever to
the FAST position.
4. Engage the drive clutch
lever [2] and confirm the
following:
a. Mower does not
self-propel.
b. Mower begins to
self-propel or creeps very
slowly forward when the
shift lever is moved one
notch forward.
If the mower does not
operate as outlined above, go to step 5.
If the mower does operate as outlined above, adjustment is
not required.
5. Loosen the top [3] and
bottom [4] drive clutch
cable locknuts with a 10
mm wrench. Move the
adjuster [5] up or down,
as required, until the
mower operates as
outlined in step 4. Tighten
the locknuts.
THROTTLE CABLE
ADJUSTMENT
1. Move the throttle lever [1] to
the fast position [2].
2. Remove air cleaner
cover.
3. Measure clearance
between control choke
arm [3] and control
lever [4]. Clearance
should be 0 ~ 1 mm. If
clearance is correct,
no adjustment is
necessary. If clearance
is incorrect, proceed to
step 4.
4. Loosen lock nuts [5]
with a 10 mm wrench. Move
adjuster [6] up or down as
required to achieve
clearance in step 3.
Retighten locknuts [5].
BLADE REMOVAL AND INSTALLATION
If you remove the blades for sharpening or replacement, you will need
a torque wrench for installation. Wear heavy gloves to protect your
hands.
BLADE SHARPENING: To avoid weakening the blades, or causing
imbalance or poor cutting, the blades should be sharpened by trained
staff at an authorized Honda dealer.
BLADE REPLACEMENT: Use Honda Genuine replacement blades or
their equivalent.
10 ~ 15 mm
[1
]
[2]
[3]
[1]
280 mm
120 mm
[2]
[3]
[4]
[5]
STOP
[2]
[1]
0 ~ 1 mm
[3]
[4]
[5]
[6]
HXE.book Page 17 Monday, August 6, 2007 10:44 AM
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HRX537 HMEA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HRX537 HMEA in the language / languages: English as an attachment in your email.

The manual is 4,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info