477990
14
Zoom out
Zoom in
Previous page
1/56
Next page
14 ENGLISH
Spark Plug Service
NOTICE
Incorrect spark plugs can cause engine damage.
For good performance, the spark plug [1] must be properly gapped
and free of deposits.
1. Disconnect the spark
plug cap [2], and
remove any dirt from
around the spark plug
area.
2. Remove the spark
plug with a spark plug wrench
[3].
3. Inspect the spark plug.
Replace it if the electrodes
are worn or if the insulator is
cracked or chipped.
4. Measure the spark plug
electrode gap with a suitable
gauge. The gap should be
0.7 ~ 0.8 mm. Correct the
gap, if necessary, by carefully
bending the side electrode.
5. Install the spark plug
carefully, by hand, to avoid
cross-threading.
6. After the spark plug seats,
tighten with a spark plug
wrench to compress the
washer.
If reinstalling the old spark
plug, tighten 1/8 to 1/4 turn
after the spark plug seats.
If installing a new spark plug, tighten 1/2 turn after the spark plug
seats to compress the washer [4].
NOTICE
A loose spark plug can overheat and damage the engine.
Overtightening the spark plug can damage the threads in the
cylinder head.
7. Install the spark plug cap on the spark plug.
SPARK ARRESTER SERVICE
In Europe and other countries where machinery directive 2006/42/EC
is enforced, this cleaning should be done by your serving dealer.
The spark arrester must be serviced every 100 hours to keep it
functioning as designed.
1. Allow the engine to cool, and then remove the three bolts [1] from
the muffler shield [2].
2. Remove the muffler shield [2].
3. Remove the screw [4].
4. Remove the spark arrester [3] from the muffler [5].
5. Check for carbon deposits on the spark arrester and the exhaust
port. Brush carbon deposits away. Be careful to avoid damaging
the spark arrester screen.
6. Install the spark arrester in the muffler.
7. Install the muffler components on the engine, and tighten the three
bolts securely.
FLYWHEEL BRAKE LEVER OPERATION INSPECTION
Start the engine outdoors. Move the throttle to FAST. Release the
flywheel brake lever; the engine should stop quickly.
If the flywheel brake does not operate properly, take the mower to an
authorized Honda servicing dealer for repair.
Recommended spark plugs: NGK - BPR5ES
[2]
[1]
0.7 ~ 0.8 mm
[4]
[3]
[1]
[2]
[3]
[4]
[5]
00X39VG36410.book Page 14 Monday, November 16, 2009 1:01 PM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HRS536 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HRS536 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 7,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda HRS536

Honda HRS536 User Manual - German, Dutch, Italian - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info