580806
41
Zoom out
Zoom in
Previous page
1/56
Next page
41
MAINTENANCE
FITTING THE BLADE
1. Clean off the dirt and grass from the area where the blade is to be fitted.
2. Fit the blade [2] with the two screws [3] and special washers [1] as shown in the diagram.
3. Fit the special washers with the convex side marked "OUT" facing the screws.
CAUTION:
The blade turns in the anticlockwise direction. When fitting it, position the blade with the
cutting edges facing in the direction of rotation (with the engraved reference facing the blade
holder).
The blade screws are specially designed for mounting the blade. Do not use any other
screws in their place.
4. Retighten the blade screws with a torque wrench [4]. Use a wooden wedge to prevent the
blade turning when you are tightening the screws.
Tightening torque for blade screws: 5 to 6 kg.m (49 to 59 N.m)
CAUTION:
If you do not have the equipment required for sharpening and a torque wrench [4], you should
have the blade sharpened and the blade screws tightened by an approved Honda dealer.
If the blade screws are tightened insufficiently or too much, they may break or come loose.
GB
C15 D1 D6
D7 D9
ENTRETIEN
REMONTAGE DE LA LAME
1. Nettoyer la saleté et l’herbe se trouvant autour de la zone de montage de la lame.
2. Installer la lame [2] en utilisant les deux vis [3] et les rondelles spéciales [1] comme illustré.
3. Monter les rondelles spéciales avec le côté convexe marqué «OUT» tourné vers les tête de
vis.
PRÉCAUTION :
La lame tourne dans le sens inverse des aiguilles d’une montre. Lors du remontage, placer
la lame de manière à ce que les arêtes tranchantes soient face à la direction de rotation
(référence gravée tournée contre le support de lame).
Les vis de lames sont spécialement conçues pour cet usage. Ne pas utiliser d’autres vis que
celles d’origine.
4. Resserrer les vis de lame avec une clé dynamométrique [4]. Utiliser un bloc de bois pour
empêcher la lame de tourner lors du resserrage des vis.
Couple de serrage pour les vis de lame :
de 5 à 6 kg.m (de 49 à 59 N.m)
PRÉCAUTION :
Si vous ne disposez pas de l’équipement nécessaire à l’affûtage et de clé
dynamométrique [4], faites réaliser l’affûtage et resserrer les vis de lame par un
concessionnaire ou revendeur Honda agréé.
Des vis de lame trop ou trop peu serrées peuvent se briser ou se dévisser.
F
C15 D1 D6
D7 D9
SAFETY
Omhre42b_D-GB-F2.fm Page 41 Jeudi, 4. septembre 2003 9:05 09
41


Need help? Post your question in this forum.

Forumrules
1

Forum

honda-hre42b

Reset search

  • Are the batteries still available for this lawn mower. HRE42B
    Please can you give me a price.

    This machine was purchased about 13 years ago.

    Regards Martin Pitts Submitted on 25-3-2017 at 18:28

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HRE42B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HRE42B in the language / languages: English, German, French as an attachment in your email.

The manual is 2,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda HRE42B

Honda HRE42B User Manual - Dutch, Italian, Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info