473996

Honda HRD536 Manual

55
Zoom out
Zoom in
Previous page
1/92
Next page
MAINTENANCE
THROTTLE CONTROL CABLE ADJUSTMENT
1. Move the throttle control lever [1] to the “FAST” [B] position. The arm [9] should touch the
choke control [7] (clearance 0 to 1 mm).
2. If an adjustment is necessary, loosen the block nut [2] of the throttle cable and turn the
adjuster [3] as required to obtain the clearance (0 to 1mm). Tighten the lock nut [2] securely.
Place the throttle control lever in the “STARTER” position [A] and check whether the choke
arm [7] is completely raised.
3. Push the choke lever [4] with your finger to check whether it is all the way to the right. Adjust
the screw [8] so that is just touches the throttle arm [9], with the choke arm [7] completely
raised.
4. Place the throttle control lever on the “FAST” position [B]. Make sure that the arm [5] is right
against the screw [6]. Check that the clearance between the arm [9] and the choke arm [7]
is correct. Start the engine and make sure it stops when the throttle control lever is moved
to the “STOP” position [D] (manual start models). Readjust the cable if necessary.
CAUTION:
• If you do not have the required skills or equipment, it is recommended to ask your HONDA
dealer for adjustment.
• If the mower cannot be operated correctly, have it adjusted by an approved HONDA dealer,
who has the special tooling necessary for this work.
GB
ENTRETIEN
RÉGLAGE DU CÂBLE DE COMMANDE DES GAZ
1. Amener la manette de commande des gaz [1] sur la position “RAPIDE” [B]. Le bras [9] doit
juste toucher la commande de starter [7] (0 à 1 mm de jeu).
2. S’il est nécessaire d’effectuer un réglage, desserrer le contre-écrou [2] du câble de
commande et manœuvrer l’écrou tendeur [3] afin, selon le cas, d’augmenter ou de diminuer
le jeu (0 à 1 mm). Resserrer le contre-écrou [2]. Amener la manette des gaz en position
“STARTER” [A] et vérifier que le bras de starter [7] soit levé à fond.
3. Pousser la biellette du volet de starter [4] avec le doigt afin de vérifier si elle va bien
complètement à droite. Régler la vis [8] afin qu’elle touche juste le levier des gaz [9] quand
le bras de starter [7] est levé à fond.
4. Amener le levier des gaz en position “RAPIDE” [B]. Vérifier que le bras [5] soit en butée contre
la vis [6]. Vérifier que le jeu soit respecté entre le bras [9] et la commande de starter [7].
Mettre le moteur en marche et s’assurer qu’il s’arrête dès que l’on met le levier de commande
des gaz sur la position “ARRÊT” [D] (modèles à démarrage manuel). Régler de nouveau le
câble si nécessaire.
PRÉCAUTION :
• Si vous n’avez pas les compétences ou l’équipement nécessaires à cette opération, il est
recommandé de confier ce réglage à un concessionnaire HONDA.
• Si le fonctionnement correct ne peut être obtenu, faire effectuer le réglage par un concessionnaire
HONDA agréé, qui dispose de l’outillage spécial nécessaire à cette intervention.
F
55
… 55 …


Need help? Post your question in this forum.

Forumrules
1

Forum

honda-hrd536

Reset search

  • Hi, can you tell me what the guarantee is on the Honda hrd536 lawnmowers.
    Thank you. Submitted on 15-9-2022 at 14:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HRD536 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HRD536 in the language / languages: English, German, French as an attachment in your email.

The manual is 2,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda HRD536

Honda HRD536 User Manual - Dutch, Italian, Spanish - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info