459023
63
Zoom out
Zoom in
Previous page
1/88
Next page
63
ENTRETIEN
REMPLACEMENT DE LA LAME
PRÉCAUTION :
L’équilibre de la lame est essentiel pour obtenir de bonnes performances de coupe. Il faut
donc changer toute lame qui serait endommagée ou dont l’équilibre ne peut être rétabli.
N’utiliser qu’une lame de rechange d’origine Honda.
REMONTAGE DE LA LAME
1. Nettoyer la saleté et l’herbe se trouvant autour de la zone de montage de la lame.
2. Installer la lame [2] en utilisant les 2 vis [1] et les rondelles spéciales [4] comme illustré. Les vis de
lames sont spécialement conçues pour cet usage. Ne pas utiliser d’autres vis.
3. Resserrer les vis de lame avec une clé dynamométrique [5]. Utiliser un bloc de bois pour
empêcher la lame de tourner lors du resserrage des vis.
Couple de serrage pour les vis de lame
:de5à6kg.m (49 à 59 Nm).
PRÉCAUTION :
Si vous ne disposez pas de clé dynamométrique, faites resserrer les vis de lame par un
concessionnaire agréé Honda avant d’utiliser la tondeuse.
Si les vis de lames sont trop ou trop peu serrées, elles peuvent se briser ou se dévisser.
MAINTENANCE
BLADE REPLACEMENT
CAUTION:
Blade balance is critical to proper mower performance. Replace any blade that is damaged or
out of balance. Use only genuine Honda replacement blades.
BLADE FITTING
1. Clean the dirt and grass from around the blade assembly area.
2. Fit blade [2] using the two bolts [1] and special washers [4] as shown. Fit the special washers
with their concave side facing the blade and the convex side facing the bolts. The blade bolts
are specially designed for this purpose. Do not use other bolts.
3. Retighten the blade bolts using a torque wrench [5]. Use a wood block to stop the blade
rotating when tightening the bolts.
Blade bolt tightening torque
: 5 to 6 kg.m (49 to 59 Nm)
CAUTION:
If you do not have a torque wrench, ask your approved Honda mower dealer to tighten the
blade bolts for you before you use the mower.
If the blade bolts are too tight or too slack, they may break or unscrew.
F
GB
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HRB475 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HRB475 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda HRB475

Honda HRB475 User Manual - Dutch, Italian, Spanish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info