13145
2
Zoom out
Zoom in
Previous page
1/12
Next page
2
COMPONENT & CONTROL LOCATION
THROTTLE CABLE CONNECTION
The throttle lever is provided with holes for attaching the throttle cable.
1. Remove the screw and the cable holder.
2. Hook the solid wire cable end into the throttle lever as shown.
3. Move the throttle cable control into the fast (or high) throttle
position.
4. Move the throttle lever by pulling the throttle cable until the throttle
lever just contacts the choke lever. Install the cable holder securing
the throttle cable and tighten it securely.
5. Move the throttle control to the
choke position and verify that
the engine choke rod moves
the carburetor choke arm fully
closed. If necessary, adjust
screw B so it just contacts the
choke travel stop.
6. Start the engine and move the throttle lever to the fast (or high)
position. Using a tachometer, check the engine speed. Turn screw
A to obtain the top no load engine speed specified by the
equipment manufacturer.
7. N types: Move the throttle cable control lever to the stop position
and confirm that the engine shuts off.
BEFORE OPERATION CHECKS
IS YOUR ENGINE READY TO GO?
For your safety, and to maximize the service life of your equipment, it
is very important to take a few moments before you operate the engine
to check its condition. Be sure to take care of any problem you find, or
have your servicing dealer correct it, before you operate the engine.
Before beginning your preoperation checks, be sure the engine is level
and the flywheel brake lever (A type engines) or the throttle lever
(N type non-flywheel brake engines) is in the STOP position.
Always check the following items before you start the engine:
1. Fuel level (see page 5).
2. Oil level (see page 5).
3. Air cleaner (see page 5).
4. General inspection: Check for fluid leaks and loose or damaged
parts.
5. Check the equipment powered by this engine.
Review the instructions provided with the equipment powered by
this engine for any precautions and procedures that should be
followed before engine startup.
OPERATION
SAFE OPERATING PRECAUTIONS
Before operating the engine for the first time, please review the
SAFETY INFORMATION section on page 1 and the BEFORE
OPERATION CHECKS above.
Review the instructions provided with the equipment powered by this
engine for any safety precautions that should be observed with engine
startup, shutdown, or operation.
STARTER GRIP
SPARK PLUG
OIL FILLER CAP/
DIPSTICK
MUFFLER
FUEL FILLER CAP
FLYWHEEL
BRAKE LEVER
(A TYPES)
CHOKE/
THROTTLE
LEVER
AIR CLEANER
FUEL VALVE LEVER
THROTTLE LEVER
THROTTLE
CABLE
CABLE HOLDER
CHOKE
LEVER
SCREW A
SCREW B
CHOKE TRAVEL
STOP
CHOKE
ARM
CHOKE
ROD
WARNING
Improperly maintaining this engine, or failure to correct a
problem before operation, can cause a malfunction in
which you can be seriously hurt or killed.
Always perform a preoperation inspection before each
operation, and correct any problem.
WARNING
Carbon monoxide gas is toxic. Breathing it can cause
unconsciousness and even kill you.
Avoid any areas or actions that expose you to carbon
monoxide.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda Honda Engines GXV140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda Honda Engines GXV140 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda Honda Engines GXV140

Honda Honda Engines GXV140 User Manual - German - 16 pages

Honda Honda Engines GXV140 Quick start guide - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info