Manual Honda HF2417 (page 19 of 160) (English, German, Dutch, French, Italian, Spanish)

580724

Zoom out

Zoom in

1/160

19 EN

6.4 DISMANTLINGANDREPLACEMENT

6.4.1 Oilengine

rain the oil while the engine is still hot to ensure quick, complete

draining.

Removethefillercapwiththedipstickandplaceasheetofcardboard

or something similar under the drain tube to prevent the oil from

drippingontothemachine’schassis.

Unscrewplug(1);whenrefittingtheplugtakecareovertheposition

ofthe innergasket.

Fill with the recommended oil until the upper limit of the dipstick is

reached( 5.3.3).Screwthedipstickcapbackon.

6.4.2 Oilfilterchange only

HF2622H

◊

••

)

1. Draintheengineoil

( 6.4.1).

2. Remove the oil filter (1) with a filter wrench (2) and let the re-

mainingoil drainout.Discardtheoilfilter.

3. Cleanthe filterbase(3).

4. Coatthe newO-ring(4)onthenewfilterwithcleanengineoil.

5. Installthenewoilfilteronthefilterbaseandtightenitbyhandun-

tilthe O-ringseatsagainst thefilterbase.

6. Tightenthe oilfilterto thespecifiedtorque

(12Nm -1.20kgm).

Use only a Honda genuine oil filter or a filter of

equivalentqualityspecifiedforyourmodel.Usingthe wrongHonda

filter or a non-Honda filter which is not of equivalent quality may

cause engine damage.

7. Pour the specified amount of recommended oil into the engine.

Starttheengineandcheckthe filterforleaks.

8. Stoptheengineand rechecktheoillevel.Ifnecessary,addoilto

bringit uptotheproperlevel.

Ask your authorized Honda dealer for advice on

the filter wrench (special tool).

NOTE

IMPORTANT

Accessformakingthisadjustment

isbytakingofftheinspectionhatch

onthe tunnelbeneaththe seat.

Loosenthenut(1)whichholdsthe

bracket(2)andturnthenut(3)un-

tilthe lengthofthespringis:

A=47,5-49,5 mm

B=45-47 mm

measuredinsidethewashers.Whentheadjustmenthasbeenmade,

tightenthe nut(1).

Do not screw below these levels to avoid over-

loading the brake unit.

Ifthebrakestilldoesnotworkproperlyeven

after this adjustment, immediately contact your Dealer .DO

NOT ATTEMPT OTHER WORK ON THE BRAKE THAN DE-

SCRIBED HERE.

6.3.5 Adjusting thetensionof thedrive belt

If you should notice that forward

drivepowerhasdropped,itwillbe

necessary toadjust thetension of

stretcher’s spring to return to top

operationalconditions.

Accessformakingthisadjustment

isbytakingofftheinspectionhatch

onthe tunnelbeneaththe seat.

Loosen the locking nuts (2) and

tighten or loosen the screw (1) as

much as necessary for a length

«A»of thespring(3) of:

A=129-131 mm A=109-111 mm

measured tothe outside oftheend ofthespring.Whentheadjust-

menthas beenmade,tightenthenuts(2).

When replacing the belt,take great carewhenus-

ing for the first few times as engagement may be sudden until the

belt is sufficiently run in.

6.3.6 Adjustmentofthe springofthe pawlforhooking

the grass-catcher

If the grass-catcher tends tojump

about andtoopen upwhen going

overroughground,orifitisdifficult

to hook back on after being emp-

tied, the tension of the spring will

needto beadjusted(1).

Changethehookingpointbyusing

one of the holes (2) until the re-

quiredresultisachieved.

NOTE

HF2315SB• HF2•••H

♦

•

WARNING!

IMPORTANT

HF2•••HT•HF2•••HM•

HF2•••SB•

F2622

◊

•

F24••

◊

•

F23••

◊

•

Hi honda 2417 hte cutting blade works going forword after 10 minutes wont go backwards when hot regards kev Submitted on 21-4-2021 at 19:11
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honda HF2417 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 11,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honda HF2417 Manual

Product: