580724
16
Zoom out
Zoom in
Previous page
1/160
Next page
16EN
Release the three cotter pins
(10) holding the pins onto the
liftinglever,beingcarefulnot to
touchthenutsorlocknutsinor-
d
ertokeepthemparallelforas-
sembly.
Having checked that there is
nothingintheway,thedeckcan
be removed, taking it out to-
wardstheleftsothatallthepins
comeout oftheirpositions.
W
hen assembling,perform the
operations described above in
reverse while making sure that
thefrontterminalofthecollector
channelproperlyfitsintotheexit
ofthe cuttingdeck.
Removethe"Mulchingcable".
Removethepin(1)andextract
thering (2).Loosethe nut(3)
andremovethecable (4).
Putthecuttingheightadjustment
lever into the notch at position
«1».
Release the spring (1) of the
bladeengagement.
Loosen the register (2) and ex-
tractitfromtheseat.
Free the bladesbelt (4)from the
clutchpulley(5).
Removethetwocotterpins(6)
from the two front connecting
rodpins(7),withoutloosening
orchangingthepositionofthe
nuts(8) andlocknuts(9).
Remove the two cotter pins (10) of the
rearpins.
Afterchecking that there are noobstruc-
tions,removethedeckinsuchawaythat
allthe pinscomeout oftheirhousings.
HF2622H
HF2417HTHF2417HM
HF24
HF26
HF24
Rearaxle
Thisisasealedsingleunitwhichdoesnotrequiremaintenance.Itis
permanentlylubricatedandthislubricantdoesnotneedchangingor
t
oppingup.
6.2.3 Battery
Toensurelonglifetothe battery, itises-
sentialtokeepitcarefullymaintained.The
battery on your machine must be
chargedbeforeusingforthefirsttime
( 3.4).
Duringperiodswhenitisnotused,
the charge level can be kept con-
stant by using the maintenance
battery charger supplied. For this
purpose the machine is supplied
with a connector (1) to be con-
nected to the corresponding bat-
tery chargerconnector.
No device other than the battery charger is to be
connected to this connector.
The charge must be maintained with the battery
charger, following the instructions given in the instruction booklet.
Other recharging systems may definitively damage the battery.
Alowbatterymustberechargedassoonaspossible.Otherwise,ir-
reparabledamagecouldbedonetothebattery’selements.
Periodicallychecktheelectrolytelevel.Whentoppingoff,useONLY
distilledwaterforbatteries.
6.3 CHECKS ANDADJUSTMENTS
6.3.1 Dismantling,sharpeningand balancingblades
Bladesthatarebadlysharpenedtearatthegrass,reducecollection
andmakethe lawnturnyellow.
When accessing the blades, remove the cutting
deck that is equipped with aquick release system thatmakes their
removal from the machine easy.
a) Removingthecutting deck
After moving the cutting height
levertoposition«1»,loosenthe
engagementcableadjuster(1),
pullitoutandreleasethespring
(2).
Freethebladesbelt(6)fromthe
clutchpulley(7).
Release the two cotter pins (8)
whichholdthetworods(9)onto
theframe.
HF2315
IMPORTANT
IMPORTANT
IMPORTANT
10
1 2
2
3
41
16


Need help? Post your question in this forum.

Forumrules
1

Forum

honda-hf2417

Reset search

  • Hi honda 2417 hte cutting blade works going forword after 10 minutes wont go backwards when hot regards kev Submitted on 21-4-2021 at 19:11

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda HF2417 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda HF2417 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 11,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info