Manual Honda HF2417 (page 5 of 160) (English, German, Dutch, French, Italian, Spanish)

580724

Zoom out

Zoom in

1/160

H) Inserttheemptyinglever(19)inits

positionand putinthelimitstopscrew

(20)with itsnut(21).

3.3 GRASS-CATCHER SUPPORTASSEMBLY

itthetwobrackets(1)ontherearplate

(2),usingforeachbracketthreescrews

(3) whicharesupplied, asshown, with-

outfully tighteningthenuts(4).

The supports (1) must be mounted so

that the wings (1a) are turned inwards.

Hook the upper part of the grass-

catcherframe(5)ontothebracketsand

centreitupwiththerearplate(2).

Adjust the position of the two brackets

(1)tothestop(6)sothat,whenturning

thegrass-catcherframe,thepin(7)slots

intothe seat(8)correctly.

Checkagain thatthe frame(5) isprop-

erly centred with the rear plate (2) and

thatitrotatescorrectly,asshownabove,

andthenfullytightenthe screws(3)andthenuts(4).

3.4 ASSEMBLINGTHE LEVERS FORTIPPING

THE GRASS-CATCHER

Positiontheleveraxle(1)inthenotch

ofthetwoplates(2)andattachthem

on the internal side of the grass-

catcher supports (3), using the in-

cluded screws (4) in the sequence

shown.

Connecttheendoftherod(5)ofthe

lifting piston tothe lever (6) withthe

pin(7)andattachthetwosnaprings

(8).

Beforeattachingthegrass-catchertoitssupports,makesurethat

thetipping levermovesproperly.

3.5 REMOVAL OFTHESTOP FROMTHE HOOKINGPAWL

OFTHEGRASS-CATCHER

Fortransport purposes,thepawl(1)hook-

ingthegrass-catcherisheldontotherear

plate by a stop (2).This stop must be re-

moved before fitting the grass-catcher

brackets, and is not to be subsequently

used.

F2•• •SB•

F2•• •HM•

HF2•••HT•

3.2 GRASS-CATCHER ASSEMBLY

A) Jointheupperpartoftheframe(1)to

thefrontcomponent(2) usingthesupplied

screwsand nuts(3)asshown.Fitthetwo

rubbercaps(4)intothe holesinthetube

offrontframe(2).

B) Before fully tightening the nuts (3),

insert the two supports (5) between the

plates of the upper frame (1) with the

rollersturnedinwards.Fastenthem with

the screws and nuts (6) and then fully

tightenthe nuts(3).

C-D) Attachthetwosideelements(7),usingthescrewsandnuts

(8and 9)asshown.Fit thetworubbercaps (10)intotheholesin

thetwosideelements(7).

E) Inserttheframeinthecanvascover(11)makingsureitiscorrectly

positionedonthebaseperimeter.Hooktheplasticprofiles(12)onto

theframetubeswith theaidofascrew-driver(13).

F) Placetheplate(14)betweenthecan-

vasandthelowerpartoftheframe’sright

sideelement (7a),lininguptheholes.

F) Attach the stiffening bar (15) under the

frame with screws and nuts (16) keeping

theflat partturnedtowardsthecanvas.

G) Using the six screws (18), attach the

cover(17)totheframe’supperpart(1).

HF2•••HM•HF2• ••SB•

HF2• ••HT•

5 EN

Hi honda 2417 hte cutting blade works going forword after 10 minutes wont go backwards when hot regards kev Submitted on 21-4-2021 at 19:11
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honda HF2417 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 11,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honda HF2417 Manual

Product: