625322
6
Zoom out
Zoom in
Previous page
1/18
Next page
6
ENGLISH
Moving the Tiller
Do not transport the tiller with the engine running.
The tiller has transport wheels [1] to allow easy maneuvering to and
from the work area. Install the transport wheels by inserting the wheel
mount [2] onto the drag bar [3]. Secure with the locking clevis pin [4].
See TILLER OPERATION (page 7) for additional information.
Before tilling, remove the transport wheels from the drag bar.
STARTING THE ENGINE
1. Move the engine switch
[1] to the ON position.
2. To start a cold engine, move the choke lever [2] up to the CLOSED
(E) position.
To restart a warm engine, leave the choke lever down in the OPEN
position.
3. To start a cold engine, or after refueling an engine that has run out
of fuel, press the priming bulb [4] repeatedly until fuel can be seen
in the clear-plastic fuel-return tube [5].
To restart a warm engine, it is not necessary to press the priming
bulb.
4. Place your left hand on the carrying handle [6] and hold it firmly.
Make sure your feet are away from the tiller tines. With your right
hand, pull the starter grip [3] lightly until you feel resistance, then
pull briskly. Return the starter grip gently.
5. If the choke lever was moved to the CLOSED (E) position,
gradually move it to the OPEN position as the engine warms up.
Allow the engine to warm up for a few moments after starting a
cold engine.
The tiller tines should not rotate with the engine idling. If there is
rotation at idle, adjust the idle speed (page 11) before using the
tiller.
STOPPING THE ENGINE
1. Release the throttle lever [2].
2. Move the engine switch [1] to
the OFF position.
[4]
[1]
[3]
[2]
OFF
ON
OFF
[1]
[2]
[4]
[3]
[6]
[5]
OFF ON OFF
[1]
[2]
FG110 EU.book Page 6 Thursday, January 22, 2009 8:14 AM
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda FG110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda FG110 in the language / languages: English as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda FG110

Honda FG110 User Manual - German - 18 pages

Honda FG110 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info