625322
5
Zoom out
Zoom in
Previous page
1/18
Next page
5
ENGLISH
Safety Inspection
Look around the engine for signs of oil or petrol leaks. Wipe up any
spills before starting the engine.
Replace any damaged parts.
Check that all fasteners are in place and secure. Tighten as
necessary.
Tiller Tine Inspection
Look for signs of damage to the tilling tines (or any accessory
installed). Replace any tiller tines and parts that are worn out, bent,
cracked, chipped, or damaged in any way.
When using an accessory, make sure it is properly installed and
securely fastened (see attachment installation instructions).
Check that the debris shield is securely installed and in good
condition.
Maintenance Inspection
Check the oil level (page 8). Running the engine with a low oil level
can cause engine damage.
Check the air filter (page 9). A dirty air filter will restrict air flow to
the carburetor, reducing engine and tiller performance.
Check throttle operation (page 11). The throttle must operate
smoothly for good throttle control.
Check the fuel level (page 11). Starting with a full tank will
help to eliminate or reduce operating interruptions for
refueling
.
OPERATION
SAFE OPERATING PRECAUTIONS
Before operating the tiller for the first time, please review
IMPORTANT SAFETY INFORMATION (page 2) and BEFORE
OPERATION (page 4).
Even if you have operated other tillers, take time to become familiar
with the operation of this tiller’s controls and handling.
For your safety, avoid starting or operating the engine in an enclosed
area, such as a garage. Your engine’s exhaust contains poisonous
carbon monoxide gas which can collect rapidly in an enclosed area
and cause illness or death.
If the tiller starts to shake or vibrate, stop the engine immediately.
After the tiller tines have completely stopped, inspect them to
determine the cause of the vibration. Sudden vibration is a sign of a
hazardous problem, such as a loose or damaged tilling tines (or tiller
attachment), hidden objects in the soil, or the ground that is too hard
to till. Do not operate the tiller until the problem is corrected.
Prolonged exposure to vibration may cause hand/arm vibration
syndrome (HAVS). Symptoms include loss of skin color in the hands
and numbness or a painful tingling sensation in the fingers, hands,
and arms. Regular users of any power equipment may feel the
numbness or pain spontaneously, at any time, not just after using the
equipment. If any of these symptoms occur, see a physician
immediately.
Tine Installation
Make sure the tines are installed properly with the blades angled
inward and the tine spacers [1] facing each other. The leading edge of
each blade is slanted.
Viewed from the front.
Drag Bar Installation
1. Make sure the engine is OFF before installing the drag bar.
2. Remove the lock pin [1] and the 6 x 25 mm clevis pin [2].
3. Install the drag bar [3] angled to the rear. Adjust the height to one
of 4 height positions and insert the 6 x 25 mm clevis pin. Secure
with the lock pin.
When your tilling job is completed, reinstall the transport wheels onto
the drag bar.
[1]
FORWARD
[3]
[2]
[1]
FG110 EU.book Page 5 Thursday, January 22, 2009 8:14 AM
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda FG110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda FG110 in the language / languages: English as an attachment in your email.

The manual is 2,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda FG110

Honda FG110 User Manual - German - 18 pages

Honda FG110 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info