624987
35
Zoom out
Zoom in
Previous page
1/40
Next page
12. INSTALLATION OF OPTIONAL PARTS
Remote control kit
The generator may be adapted for remote control operation by use of an
optional kit.
1. Unscrew the two 6 x 10 mm flange bolts and 6 x 8 mm screws attaching
the control panel. Remove the control panel.
6 x 10 mm FLANGE BOLTS
2. Position the relay box on the back of the control panel with the studs
inserted through the holes in the relay box flange. Install a 4 mm nut and
lock washer on each stud and tighten securely.
3. Remove the 6-P coupler with a jumper wire from the wire harness female
coupler. Connect the relay box 6-P male coupler to the wire harness female
coupler.
4. Insert the relay box 6-P female coupler in the hole in the sub panel below
the control panel and install with the two self-tapping screws and coupler
holder.
4 x 10 mm SELF-
TAPPING SCREWS
CONTROL
COUPLER HOLDER
HOLE IN SUB PANEL
31
4 mm’NUT
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda EX5500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda EX5500 in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info