625066
27
Zoom out
Zoom in
Previous page
1/49
Next page
POLARITY SELECTION
The welding terminals are labeled, “+” (positive) and “-” (negative).
Changing the polarity of the cables will affect the weld. The correct polarity
selection is dependent on the type of electrode you are using and the type
of material you are welding; refer to the electrode manufacturer’s recom-
mendations .for best results.
For straight polarity, attach the electrode cable to the negative terminal,
and attach the work cable to the positive terminal. To change to reverse
polarity, reverse the cables.
I
STRAIGHT POLARITY
I
REVERSE POLARITY
WORK CABLE
ELECTRODE
WELDING DUTY CYCLE
The duty cycle is the percentage of time that the welder can be operated in
a given 10 minute beriod.
For example, at a rated output of 130 amperes, the EW 171’s duty cycle is
50%. This means that at 130 amperes, welding can be performed for a
total of 5 minutes out of every 10 minute period. The duty cycle is longer at
lower operating currents, and shorter at higher currents.
(EW171)
Current
170A
150A 136A IIOA Below 90A
Rate
15% 25% 50% 65% 100%
(EWI 40)
Current
140A 115A IOOA / 85A 1 Below 65A 1
I
Rate
I
15%
I
25%
I
40%
I
65%
I 100% I
CAUTION: Do not operate the welder beyond its duty cycle; doing so will
decrease the performance and service life of the generator/welder.
25
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda EW140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda EW140 in the language / languages: English as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info