625066
26
Zoom out
Zoom in
Previous page
1/49
Next page
SELECTING THE CORRECT WELDING CURRENT
Measure the thickness of the metal you are welding and then refer to the
table below to select the proper electrode size and current setting.
PLATE THICKNESS
ELECTRODE DIAMETER
CURRENT
IN INCHES
IN INCHES
SETTING
UPTO 3/16
l/16
50- 100
UP TO l/4
3132
100-150
ABOVE II8 II8
125-175
ABOVE II4
15132
150-200
NOTE: Always make a sample weld on a piece of scrap material to be sure
you have chosen the correct electrode and current setting.
WELDING CABLE SELECTION
The table below shows the current carrying capacity. of various le’ngths and
gauges of standard copper welding cable. Whenever possible, refer to the
cable manufacturer’s recommendations.
Always allow a considerable safety margin when selecting welding cables.
The cable’s length and gauge (diameter), along with the material it is made
from, all combine to determine how much current it can safely carry.
CAUTION: An undersize welding cable will offer unacceptably high’
resistance to current flow. This high resistance.will shorten the service life
of the generator/welder, and can even make the welding cables become
hot enough to cause painful burns.
LENGTH .IN FEET*
CABLE
CABLE
GAUGE
DIA.
O-50 FT. 50-100 FT.
100-250 FT.
CURRENT CAPACITY AMPERES
. 1 .644
250
200 170.
2 .604
200
195
NOTE: The cable lengths given in the table above are the combined lengths of the
negative and positive cables.
24
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda EW140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda EW140 in the language / languages: English as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info