808511
134
Zoom out
Zoom in
Previous page
1/135
Next page
Voice control and additional services
135
Summer break In the summer, you can switch the heating schedule in the rooms to "manual"
so that the heating schedules are no longer executed. If the heating system is
switched o in the summer, the nominal temperature is to be set to 30 °C to fully
open the valves. If the heating system remains switched on in the summer (e.g.
in multi-family dwellings), you should set the room temperature to 5 °C to fully
close the valves.
Sources of interfe-
rence
Factors which can attenuate radio signals.
Temperature limiter Only in heating operation – if the input is active, all zones stay closed and the
pump remains o. For signalling, the device LED of the Multi IO Box flashes.
Temperature oset If the radiator thermostat is installed at a disadvantageous place (e.g. behind a
curtain or cupboard), the temperature measured on location may deviate slightly
from that in the room. The thermostat is possibly unable to compensate for it so
that a general adjustment by means of temperature oset must be made. This
oset can be individually adjusted for every thermostat in the room in a range
between +/- 3.5 °C. For example, if 18 °C are measured instead of the set 20 °C,
an oset of -2.0 °C is to be set. An oset temperature of 0.0° is set in the factory
settings.
Detection of tempe-
rature drop
If a window is opened, e.g. for ventilation, in a room without window contact,
the radiator thermostat automatically detects the sharply declining temperature.
In that case, the room temperature is automatically turned down for 15 minutes
to the set open-window temperature in order to save heating energy and costs.
After the window is closed, the radiator thermostat is switched back to the
original mode (manual operation or the active heating schedule).
Valve protection
function
The radiator thermostats have a decalcifying run once a week to protect against
the calcification of valves.
Absence mode The security functions of all components of the security solution are activated.
Lead time For this time, output is actively switched with a delay for when there is any
heating/cooling demand.
Wake on radio Receive mode especially for battery operated devices; the receiver is woken up
from ‘sleep mode’ to receive radio data. During the remaining time, the receiver
stays in energy-saving sleep mode.
Cyclical reception Describes a receive mode for battery-powered devices, where a radio
connection is established at regular intervals.
134


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeMatic IP system at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic IP system in the language / languages: English as an attachment in your email.

The manual is 3.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info