808511

HomeMatic IP system Manual

133
Zoom out
Zoom in
Previous page
1/135
Next page
Voice control and additional services
134
IPv6 The Internet protocol version 6 (IPv6) is the successor of the widespread Internet
protocol IPv4 for transmission of data packages across dierent networks. Aside
from the extension of the address space, the new protocol provides numerous
technical improvements.
Actual temperature Shows the current temperature measured by the wall thermostat in the room.
LAN The Internet protocol version 6 (IPv6) is the successor of the widespread Internet
protocol IPv4 for transmission of data packages across dierent networks. Aside
from the extension of the address space, the new protocol provides numerous
technical improvements.
Load balancing Shows the current temperature measured by the wall thermostat in the room.
Load collection As far as possible, the heating zones are collectively controlled for load
collection. This increases the probability that the boiler is switched o at the end
of a PWM cycle.
Lazy config Function facilitating the configuration of HomematicIP devices. If the configu-
ration data of a certain device is changed in the app, the HomematicIP Access
Point “remembers” the data. Such data are automatically transmitted when the
device is operated the next time. Manual operation of a system button is not
required.
Message delay The message delay for HomematicIP window / door contacts enables a delayed
transmission of radio control commands. This function is suitable e.g. for the
installation of window contacts on terrace doors which are used as passages
and, at the same time, as windows for ventilation. During that time, the tempe-
rature of radiators is not regulated down.
Emergency operation The duration of the valve opening is recalculated every 15 minutes. If the radio
communication between the wall thermostat and the floor heating control
fails for a longer period of time – for instance due to an empty battery – valves
will be controlled automatically. In default setting, the valve is opened for 225
seconds (25 % of 15 minutes). When radio communication is restored, the system
changes back to normal operation.
OTAU ‘Over the Air Update’: Particularly convenient method to update the device
software via radio connections.
Powerline Technology which uses existing power lines for data transmission.
Primary Access Point The primary Access Point establishes communication with the HomematicIP
cloud server. If the primary Access Point fails, a secondary Access Point (if
available) automatically takes over this role (see also “Secondary Access Point”).
Pump, local A pump is connected to heating zone 1. Thus, heating zone 1 can no longer be
used for controlling a heating zone.
Pump protection
function
Activation of the pump every 14 days for 1 minute
PWM cycle Time for controlling the active valves. The cycle time is 15 minutes.
Secondary Access
Point
A secondary Access Point is any additional Access Point that is added to the
system. It is normally used as a range extender (router). If the primary Access
Point cannot be reached, the secondary Access Point steps in and takes over the
task of the primary Access Point (see also “Primary Access Point”).
Router Network device connecting several networks with each other. Collects status
information about the network and uses this in
Setpoint temperature Defines the temperature which is to be kept in a room.
Silent alarm If the silent alarm is activated, the indoor siren and the alarm light will not be
triggered. In case of alarm, the system only sends a push message to the app.
… 133


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HomeMatic IP system at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HomeMatic IP system in the language / languages: English as an attachment in your email.

The manual is 3.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info