690091
11
Zoom out
Zoom in
Previous page
1/100
Next page
DUO SALON | 11
GB
Body treatments
Duo Salon can be used to treat most areas of the body, but intimate areas (eg genitals,
nipples, anus) must be avoided.
Please refer to Facial Treatments section for specific advice on treating the face.
Before first treatment of a new area, always carry out a Patch Test to assess
suitability and to determine the best power level for your skin. Wait 48hours to
assess the Patch Test area and then do not retreat the same area within 7 days of the
patch test.
Prepare the treatment area by shaving then washing and drying thoroughly. (See
Preparing the Area to be Treated)
Set up Duo Salon for use (see Setting up DUO SALON) ensuring the switch on the base
unit is set to position I.
Press the power button to turn on the device. Wait for the blue LED indicator for level 1 to
illuminate.
Press the power button as required to set the power level determined by your patch test.
The green status light on the applicator head will flash rapidly.
In AFT FreeGlide mode (levels 1 & 2)
Place the crystal glass treatment window on the area to be treated, making full contact
with the skin. The status light should stop flashing and show a steady green light, to
indicate skin contact is made.
Hold the pulse button down and immediately start to move the window slowly across
the skin, maintaining constant contact. A flash will be emitted at regular intervals all the
time that you hold the button down and keep contact with the skin. You will also hear
a popping sound with each flash. Keep the treatment head moving, passing over the
treatment area up to 5 times to ensure maximum coverage.
NOTE: The rate of movement across the skin can be adjusted in line with the flash rate for
a more even coverage, i.e. by moving faster on level 1 and slower on level 2.
In Single Shot mode (levels 3, 4 & 5)
Place the crystal glass treatment window on the area to be treated, making full contact
with the skin. The status light should stop flashing and show a steady green light, to
indicate skin contact is made.
Press the pulse button once. A single flash will be emitted and you will hear a popping
sound. Move the treatment head to the next patch of skin taking care not to overlap. Wait
for the status light to be steady green, then press the pulse button again.
Body Area Comfortable Energy Level
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Homedics IPL-SLN500K-EU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Homedics IPL-SLN500K-EU in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info