690091

Homedics IPL-SLN500K-EU Manual

10
Zoom out
Zoom in
Previous page
1/100
Next page
10 | DUO SALON
GB
Instructions for use
Setting Up Duo Salon
1. Remove all components from the box.
2. Completely unwind the cord between the treatment head and base unit, ready for use.
3. Check there is no damage to the crystal glass treatment window. if there is damage,
do not use.
4. Plug the power cord into the back of the Duo Salon base.
5. After connecting the power cord to the Duo Salon base, insert the plug into a mains
socket.
6. Switch the power switch at the rear of the base unit to the ‘on’ position (I).
7. The blue/white skin level indicator lights will flash on and turn o, the green status light
on the treatment head will begin flashing.
8. Press the power button on the front of the Duo Salon to cycle through the power
levels. The snowflake icon will light in blue showing that the active cooling is on and
working.
Patch test (spot test)
The patch test is used to determine your skins reaction to the Duo Salon treatment and to
help you select the optimal energy level for each treatment area. Carry out a patch test on
each area you intend to treat, at least 48 hours prior to the full treatment.
1. Prepare the patch test area by shaving, washing and drying as described above.
2. Set up Duo Salon following the instructions above and check that it is set to the lowest
power setting - level 1.
3. Place the crystal glass treatment window on the chosen test area making full contact
with the skin.
4. Deliver the first pulse on power level 1, by pressing the pulse button. You will see
a bright flash, hear a popping noise and you may feel a mild stinging or/and heat
sensation. Release the pulse button immediately to avoid delivering multiple pulses to
the same patch of skin.
5. Move the applicator along to cover the next adjacent area of skin in the test area.
6. Press the power button to increase the power level by one. Again, deliver a single
pulse by pressing the pulse button.
7. Only if you feel comfortable repeat steps 5 to 6, increasing one level at a time until you
have reached the maximum power Level (see suitable skin/hair colour table for max
suggested levels). Stop the test if you do not feel comfortable. Always stop treating
immediately if you experience any adverse eects such as severe redness, swelling or
blistering. The higher the power level, the greater the chance of an adverse reaction.
8. Wait 48 hours and examine the tested area. If the skin in the test area seems normal
(no response or mild redness) you can proceed with a full treatment in the highest
comfortable energy level you tested. If you see extreme redness, swelling or blistering,
even in the low energy level settings do not do the full treatment in that area.
WARNING: Always test an area before full treatment. Do not treat the tested area for
at least 48 hours after the patch test is done. Use the table below to make a note of the
energy level that suits you for dierent areas you wish to treat.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Homedics IPL-SLN500K-EU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Homedics IPL-SLN500K-EU in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info