623753
12
Zoom out
Zoom in
Previous page
1/17
Next page
ENGLISH
12
IMPORTANT SAFETY INSTRUCTIONS
Installation location
• Use this device in dry indoor areas only and never outdoors.
• Warning! Do not use this device near water or heavy moisture; e.g. in a damp
basement or beside a swimming pool or bathtub.
• Keep this device away from all heat sources like for example, ovens, hot plates and other heat-producing
devices/objects.
• Protect this device from extreme heat (over 35°C) and cold (under 5°C) as well as from direct sunlight and
dust.
Specific safety instructions
• When the device is used in a bathroom, unplug it after use since the proximity of water presents a hazard
even when the device is switched off.
• If the device should fall into water, disconnect the power plug from the power outlet immediately. Touch the
water only after the device has been disconnected from the mains supply. Have the device inspected by an
electrician.
• When placing the device out of your hand during use, always switch it off for safety reasons.
• The lint screen will be very hot during operation. Please be sure that the power cord does not come into
contact with the lint screen.
• For additional protection we recommend the installation of a residual current device (RCD) having a rated
residual operating current not exceeding 30mA in the electrical circuit supplying the bathroom. Ask your
installer for advice.
• Do not open the casing under any circumstance. Never insert any objects into the air intake and exhaust
openings.
• Please be sure that objects like hair pins or clips do not enter into the device. This could short-circuit or
damage the device.
• Let the device cool off completely prior to removing or attaching any accessories.
• Never use sprays or water misters near the device while it is in use.
• Danger of burns! Some components of the device may be very hot during operation. Therefore, touch the
device only on the handle.
• Never cover the air intake and exhaust openings during use.
• Ensure that hair cannot enter into the air intake and exhaust openings.
• If air intake and exhaust openings are covered during use, the integrated overheating protection will shut
the device off automatically. Disconnect the power plug and allow the device to cool off prior to restarting it.
Inspect whether the lint screen is soiled and remove any residue, e.g. hair or lint.
• Clean the device and other accessories as described in chapter CLEANING AND CARE.
HTK5002R-IM-DE-EN-V1.indb 12 01/03/2010 1:16 PM
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Home Electric HTK5002R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Home Electric HTK5002R in the language / languages: English, German as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info