644517
17
Zoom out
Zoom in
Previous page
1/30
Next page
ENGLISH
Check the working conditions. Do not
expose your bandsaw to rain. Never
use it in damp or wet locations.
Make sure there is good lighting.
Do not use the bandsaw near flamma-
ble liquids or gases.
Guard against electric shock! Avoid
body contact with earthed components.
Keep other persons away.
Do not allow other persons, particularly
children, to touch the machine or the
cable. Keep them away from your work
area.
Store tools in a safe place. When tools
are not in use they should be stored in
a dry, locked room out of children`s
reach.
Do not overload your machine. Your
bandsaw works better and safer when
used within their quoted capacity
range.
Use a machine with insufficient power
for a job at hand. Never use your band-
saw for on jobs for which it was not un-
tended.
Wear suitable work clothes! Do not
wear loose clothing or jewellery as they
might get caught in moving parts. Wear
a hair net if you have long hair.
Use personal safety equipment: ear-
muffs, safety goggles, dust mask when
working on dusty jobs.
Connect the machine to a vacuum ex-
traction system!
Do not use the cable for purposes for
which it is not designed.
Avoid abnormal working postures!
Make sure you stand squarely and keep
balance at all times.
Always pull out the power plug:
When the machine is not being used,
plug it out.
Remove adjusting keys, wrenches and
other tools from the working table after
use.
Always stay focused when working.
Reduce distortion sources in your work-
ing environment.
Check the ON/OFF Switch periodically.
Have repairs carried out only by a
qualified electrician. Have your power
connection checked by a qualified elec-
trician.
Wear safety gloves whenever you carry
out any maintenance work on the
blade.
In the case of mitre cuts the parallel
guide must be placed at the lower place
of the working table to hold the work-
piece.
A dust collecting system with a mini-
mum air velocity of 20m/min shall be
connected to the bandsaw.
Give this operation manual to every
person who works with the machine.
DO NOT USE THIS SAW TO CUT
FIREWOOD.
The machine is equipped with a safety
switch to prevent it being switched on
again accidentally after a power failure.
Never dismantle the machine`s safety
devices or render them infunctional.
Let unreadable safety stickers be re-
placed immediately.
Never cut workpieces that are too small
to be guided securely by your hand or
pushstick.
Never remove loose splinters, chips or
jammed pieces of wood when the saw
blade is running.
It is imperative to observe the accident
prevention regulations in force in your
country as well as all other generally
recognized rules of safety.
Position the blade guard so that it is
approx. 3mm above the material you
want to saw.
Secure long workpieces against falling
off at the end of the cut with a roller
table.
Make sure the blade guard is in its low-
est position when the machine is being
transported.
Blades that are deformed or damaged
have to be replaced immediately.
Worn table inserts have to be replaced
immediately.
Never start the machine when the door
protecting the blade is open.
Do not touch the blade until it has come
to a complete stop.
IMPORTANT: THIS BANDSAW IS
INTENDED ONLY FOR HOME AND DO-
IT-YOURSELF HOBBY USE. THE
MACHINE IS NOT DESIGNED FOR
PROFESSIONAL USE.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Holzmann HBS 300J at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Holzmann HBS 300J in the language / languages: English, German as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info