644517
16
Zoom out
Zoom in
Previous page
1/30
Next page
ENGLISH
1. LAYOUT
1) On/Off Switch
2) Chain bar
3) Rubber tires
4) Hand wheel
5) Base plate
6) Dust extraction connector
7) Lower blade pulley
8) Upper blade pulley
9) Tightening screw
11) Upper blade guide
12) Side cover
13) Cover fastener
14) Retaining screw for upper blade pulley
15) Machine table
16) Dial scale for tilt angle
17) Table insert
18) Fixing handles for table
19) Adjustable handle for blade guide
20) Fixing handle for blade guide
21) Legs
22) Setting screw for upper blade pulley
23) Parallel stop
24) Machine frame
25) Blade
2. ITEMS SUPPLIED
Bandsaw
Machine table
Push stick
Parallel stop
Base frame
Blade
3. PROPER USE
The bandsaw is intended for the slitting and
cross-cutting of timber or wood-like workpiec-
es. Round materials may only be cut with suit-
able holding devices.
The machine is to be used only for its pre-
scribed purpose.
Any other use is deemed to be a case of mis-
use. The user/operator and not the manufac-
turer will be held liable for damage and/or inju-
ries of any kind that result from such misuse.
The machine is to be operated only with suita-
ble saw blades. To use the machine properly
you must also observe the safety regulations,
the assembly instructions and the operating
instructions to be found in this manual.
All persons who use and service the machine
have to be acquainted with this manual and
must be informed about the machine`s poten-
tial hazard.
It is also imperative to observe the accident
prevention regulations in force in your area.
The same applies for the general rules of
health and safety at work.
HOLZMANN will not be liable for any changes
made to the machine nor for any damage re-
sulting from such changes.
Even when the machine is used as prescribed
it is still impossible to eliminate certain residual
risk factors. The following hazards may arise in
connection with the machine´s construction
and design:
Damage to hearing if ear-muffs are not
used as necessary.
Harmful emissions of wood dust when
used in closed rooms.
Contact with the blade in the uncovered
cutting zone.
Injuries (cuts) when changing the
blade.
Injury from catapulted workpieces or
parts of workpieces.
Crushed fingers.
Kickback.
Tilting of the workpiece due to inade-
quate support.
Touching the blade.
Catapulting of pieces of timber and
workpieces.
4. IMPORTANT INFORMATION
SAFETY INFORMATION
CAUTION! Whenever you use electric tools it
is imperative to take basic safety precautions
in order to reduce the risk of fire, electric shock
and personal injury. Essential safety precau-
tions include:
Keep your work area tidy! An untidy
work area may cause accidents.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Holzmann HBS 300J at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Holzmann HBS 300J in the language / languages: English, German as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info