666663

HMM smartLAB Fit W Manual

32
Zoom out
Zoom in
Previous page
1/44
Next page
32
end of measurment. Now you can leave the tread of the scale. The scale
will deactivate automatically after several seconds.
Setting up of the user data
In order to measure the adipose content and other parameter you first have to
insert your individual user data. You can store up to 8 user profiles and recall
the measured data.
The smartLAB
®
fit W Body Analyser Scale has a special function for automatic
transfer of user profiles and other functions. It is requiered that the receiving
devices supports these functions.
With the automatic setting of the scale there is no need to setup the scale
manually. When you use the scale for the first time or you change the
batteries, the scale will check for an adiquet receiving device.
If a receiving device is in reach of the scale, it will send all the setup data to
the scale. This function has the benefit of also sending the batterie status to
the receiving device.
The automatic setting can be disabled with the function setup (please refer to
the section function setup).
If you want to set up the scale manualy please press “SET” (on the side of your
scale) to create a new user profile.
Note: The weight scale can be set by the touch function, which can be found
on the right top side of the scale. The touch function represents the buttons,
which are abreast of the Set writing and the arrows at the side of the scale.
User profile:
The display now shows several illuminated preadjustments. The symbol “P1”
appears on the display (bottom, left) for user profile 1 (see picture 1). You can
confirm this choice by pressing “SET” or you can create a new user profile by
increasing the number (arrow keys on the side of the scale).
Gender:
Press „SET“ to confirm your choice and then chose your gender. The display
Pic. 1
cm
age
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HMM smartLAB Fit W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HMM smartLAB Fit W in the language / languages: English, German as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info