666663
31
Zoom out
Zoom in
Previous page
1/44
Next page
31
ENGLISH
III. Setup & Operating functions
Inserting and changing the batteries
Please open the cover of the battery case at the back of the device.
Insert 4 AAA batteries (1,5 V). Please pay attention to the polarity.
Close the cover of the battery case.
Important: Please make sure that your scale is close to a gateway when
inserting and changing the batteries, so the gateway can set the scale and
send important information like date and time. The „W“-Symbol on the scale
indicates when the scale is trying to communicate with the gateway.
Note: In case the scale does not operate please remove the batteries and
insert them again.
Your smartLAB
®
fit W Body Analyser Scale has a symbol indicating
that the batteries need to be changed. In case the batteries are
almost empty, the symbol “Lo” can be seen on the display. You
should change the batteries then.
Please remove the batteries in case you are not going to use
the scale for one month or more in order to avoid an automatic
discharge of the batteries.
The Body Analyser Scale as well as the batteries must be disposed
of according to the local regulations.
In order to guarantee a correct measurement you should calibrate
the scale always after any location change. Just tip on the scale
and wait until it shows “0.0” on the scale.
Beginning of operation / „quick weighing “
Use the smartLAB
®
fit W Body Analyser Scale bare-footed. Do not move so
you can stand on both legs. The scale starts measuring immediately and
finally shows your body weight on the display. A long beep will signal the
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HMM smartLAB Fit W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HMM smartLAB Fit W in the language / languages: English, German as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info