Manual Hitec LINX_3D (page 8 of 16) (English)

30180

Zoom out

Zoom in

1/16

EDIT

Model Reset:

This feature will allow you to reset any model back to the factory default setting. You must select the

model to be reset in the model select “SL” screen. Once you have selected the proper model, push

the “Data” inc/dec keys simultaneously, there will be an audible “beep” to verify reset.

Model Copy:

This feature allows you to copy a pre-exiting program to another model number. The model you wish

to copy “From” must be selected in the model select “SL” screen. Then using the “Aux.” +/- keys, you

can select the model you wish to copy “To”. Once you have selected the proper models push the

“Data” inc/dec keys simultaneously and there will be an audible “beep” to verify copy.

Model Select:

This feature associates a number to the model. The letters “SL” will appear on the screen with a

blinking number 0 - 9. These are your model numbers; they can be adjusted by using the “Aux.”

+/- keys to select the model you wish to program and use.

Racer Tip

To help remember which model is which number, use a little round sticky dot you can buy

at most stationary stores. Mark the model number and stick it on top of the receiver.

COPY

MODEL

RST

EPA

CHANNEL

RL X

$XX X X

COPY

MODEL

SL X

RST

RL X

XX:X X

TIMMER

COPY

MODEL

SL X

MODEL

DATA : 0 - 9

BLINKING

COPY

RST EPA

MODEL SELECT COPY

RST

MASTER

SLAVE DATA : 0 - 9

TIMER

MODEL COPY

MODEL SELECT

DATA : 0 - 9 SELECT : CHANNEL KEY

BLINKING

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitec LINX_3D in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitec LINX_3D Manual

Product: