Manual Hitec FLASH_5SX (page 15 of 23) (English)

30156

Zoom out

Zoom in

1/23

setup extremely sensitive control surfaces for the expert pilot by extending the servo travel range. Adjustment of any one

channel can be adjusted from 0% (no servo movement) to 125% of normal servo travel. Normal servo travel is considered to be

30 degrees each side of center for a total servo range of 60 degrees. The factory default setting for each of the available EPA

is 100% of normal servo travel. You may program up to 125% of normal servo travel under EPA.

To enter into the EPA function from the normal power ON mode of the transmitter, simply follow the procedure below:

1. Depress both the UP and DN/TIMER keys simultaneously.

2. The LCD display should change to the MAIN EDIT MODE menu and you should see the EPA

function on the screen.

3. Use the Channel 4 trim key to change channel selection.

4. Use the Channel 1 key to increase or decrease the value of your End Point.

5. To exit this menu at any time, depress both the UP and DN/TIMER keys simultaneously once again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitec FLASH_5SX in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitec FLASH_5SX Manual

Product: