571421

Hitachi UG50Y Manual

15
Zoom out
Zoom in
Previous page
1/112
Next page
14
English
Measuring area (Fig. 11)
If you measure the length and the width, the area is automatically
calculated.
1
Select area mode. (See “Selecting a measuring mode”)
2
Measure the length.
○
Press the measure button and aim the laser at the target
length.
○
Press the measure button again to fi nish measuring. A beep
sounds and the length measurement is indicated on the
display. The laser does not go off at this time.
3
Measure the width.
○
Press the measure button and aim the laser at the target width.
○
Press the measure button again to fi nish measuring. A beep
sounds and the width measurement and calculated area are
indicated on the display.
Display Content
Before measuring ----- m
2
----- m
After measuring
length
3.083 m
3.083 m
→Length measurement
→Length measurement
After measuring
width
6.289 m
2
2.040 m
→Area calculation result
→Width measurement
Measuring volume (Fig. 12)
If you measure the length, width and height, the volume is automatically
calculated.
1
Select volume mode. (See “Selecting a measuring mode”)
2
Measure the length.
Follow the instructions for measuring the length in area mode.
3
Measure the width.
Follow the instructions for measuring the width in area mode.
4
Measure the height.
○
Press the measure button and aim the laser at the target
height.
○
Press the measure button again to fi nish measuring. A beep
sounds and the height measurement and calculated volume
are indicated on the display.
Display Content
Before ----- m
3
----- m
After measuring
length
3.083 m
3.083 m
→Length measurement
→Length measurement
After measuring
width
6.289 m
2
2.040 m
→Area calculation result
→Width measurement
After measuring
height
5.333 m
3
0.848 m
→ Volume calculation
result
→Height measurement
Measuring sides (Pythagorean theorem)
If you measure the two sides of a right triangle, the length of the third
side is calculated automatically.
Use this mode when you cannot measure the distance because there is
an obstacle or there is no elevated target surface.
To obtain side C (Fig. 13)
1
Select side mode. (See “Selecting a measuring mode”)
2
Measure the length of side A.
Follow the instructions for measuring the length in area mode and
measure side A.
3
Measure side B.
○
Follow the instructions for measuring the length of side A and
measure the length of side B.
○
When you have fi nished measuring, a beep sounds and the
measured length of side B and calculated result of side C are
indicated on the display.
000Book_UG50Y_WE.indb 14000Book_UG50Y_WE.indb 14 2009/08/20 13:48:092009/08/20 13:48:09
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi UG50Y at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi UG50Y in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info