389694
18
Zoom out
Zoom in
Previous page
1/21
Next page
16
English
SPECIFICATIONS
Model SV8SA SV12SF
Voltage (by areas)* (110V, 115V, 120V, 127V, 220V, 230V, 240V)
Power Input* 200 W
No-Load Speed 14000/min.
Sanding pad size 80 mm x 130 mm 110 mm x 100 mm
Sanding paper size 80 mm x 170 mm 114 mm x 140 mm
Weight (without cord) 1.1 kg
* Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
Sanding paper (Grain: AA100) .............................. 1
Dust bag .................................................................... 1
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
1. Sanding paper
ϽFor SV8SA useϾ
80 x 170 mm paper clip type sanding paper
Grain: AA60, AA100, AA150
80 x 130 mm Velcro type sanding paper
Grain: AA60, AA100, AA150
ϽFor SV12SF useϾ
114 x 140 mm paper clip type sanding paper
Grain: AA60, AA100, AA150
110 x 100 mm Velcro type sanding paper
Grain: AA60, AA100, AA150
110 x 100 mm stick-on type sanding paper
Grain: AA60, AA80, AA100, AA120, AA150, AA180
Outer diameter 125 mm stick-on type sanding paper
Grain: AA60
2. Sanding pad
ϽFor SV8SA useϾ
80 x 130 mm sponge pad (Velcro type)
ϽFor SV12SF useϾ
110 x 100 mm sponge pad (Velcro type)
110 x 100 mm stick-on pad
Outer diameter 125 mm stick-on pad
3. Dust collector (Model WDE-1200)
4. Punch plate
Optional accessories are subject to change without notice.
APPLICATIONS
Finish polishing of woodwork surfaces
Sanding surfaces of woodwork or sheet metal prior
to painting, etc.
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized con-
forms to the power requirements specified on the
product nameplate.
2. Power switch
Ensure that the power switch is in the OFF position.
If the plug is connected to a power receptacle while
the power switch is in the ON position, the power
tool will start operating immediately, which could
cause a serious accident.
3. Extension cord
When the work area is removed from the power
source, use an extension cord of sufficient thickness
and rated capacity. The extension cord should be
kept as short as practicable.
4. Installing the sanding paper
(1) Bending the sanding paper:
Position the sander with its pad side facing upward
as shown in Fig. 1. Place the sanding paper on the
pad so that the center of the sanding paper is
aligned with the center of the pad, and bend both
ends of the sanding paper at a 90° angle. Then,
bend both ends again in the manner shown in Fig.
2. The sanding paper is now ready to be installed
on the sander.
(2) Installing the sanding paper:
While ensuring that the cord is not bent, place the
sander on a workbench as shown in Fig. 3, and
insert one end of the sanding paper (bent section).
Next, insert the remaining bent section in the same
manner.
CAUTION
The sanding paper must be precisely installed on
the pad, ensuring that there is ample tension (leav-
ing no slack). Loosely installed sanding paper could
result in unevenly sanded surfaces and/or damage
to the sanding paper itself.
5. Attaching and Removing the Dust Bag
(1) Attaching the Dust Bag
As shown in Fig. 4, hold the dust gate and push
it in the direction of Arrow A to attach it to the
dust outlet.
(2) Removing the Dust Bag
As shown in Fig 4, hold the dust gate and pull it
in the direction of Arrow B to remove it from the
dust outlet.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi sv 8 sa at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi sv 8 sa in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hitachi sv 8 sa

Hitachi sv 8 sa User Manual - English, German, Dutch, French, Italian, Portuguese, Spanish - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info