Manual Hitachi NV65AD3 (page 7 of 52) (English, German, Dutch, French, Italian, Spanish)

568909

Zoom out

Zoom in

1/52

English

Fig. 10

CAUTION:

Exercise care when nailing corners of lumber. When

continuous nailing corners of lumber, a nail may go

astray or break through the corner.

NOTES:

⅜ Precautions on no-load operation

Sometimes nailing will continue after driving in all

nails previously contained in the magazine.

This is termed “no-load operation”. Such operation

may deteriorate the bumper, magazine, and nail feeder.

To avoid no-load operation, occasionally confirm the

amount of remaining nails. On the other hand, all nails

should be removed after using this nailer.

⅜ After completing operation, put into the body about

2cc oil through the hose joint to protect the tool from

rust.

⅜ Under low temperature conditions, the machine

sometimes does not operate correctly. Always operate

the machine at the appropriate ambient temperature.

2. Adjusting the nail-driving depth

CAUTIONS:

When making adjustments, be sure remove your

finger from the trigger. When making adjustments, be

sure that the nail outlet is not facing downward and

that body parts or other persons are not in the path of

the nail outlet.

⅜ Adjusting the adjuster (Fig. 11)

Carry out test driving. If the nails are too deep, turn

the adjuster to the shallow side (

mark).

If the nail depth is too shallow, turn the adjuster

to the deep side (

mark) (see Fig. 11, 12).

Depth is changed 1 mm with each rotation of the

adjuster.

Fig. 11

Fig. 12

NOTES:

⅜ When adjusting the adjuster, it does not rotate more

than 3 mm from the deepest point where a nail goes

down. Do not rotate the adjuster by force beyond that

point.

⅜ The nail-driving depth can also be adjusted by changing

the air pressure used. Carry this out together with

movement of the adjuster. Using a high air pressure

that does not match the nail-driving resistance will

shorten the life of this nailer.

3. Changing the exhaust direction.

The direction of the exhaust vent can be changed

within 360° by turning the top cover. (Fig. 13).

Fig. 13

INSPECTION AND MAINTENANCE

CAUTION:

Be sure to disconnect the hose during cleaning

jams, inspection, maintenance and cleaning.

1. Countermeasure for nail jamming

(1) Remove the nail roll from the magazine, open the nail

guide, insert a rod into the nail outlet and tap the rod

with a hammer. (Fig. 14).

(2) Remove the jammed nail with slotted-head screw-

driver. (Fig. 15)

Contact Driving Position

Single-Contact

Change Lever

Adjuster

Shallow

Deep

Too shallow

Too deepFlush

Exhaust Vent

Top Cover

Adjustable range of

exhaust direction

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi NV65AD3 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi NV65AD3 Manual

Product: