Manual Hitachi NR65AK (page 8 of 50) (English, German, Dutch, French, Italian, Spanish)

568873

Zoom out

Zoom in

1/50

English

24. When removing a nail which has become stuck, make

sure to first of all disconnect the hose and release

compressed air.

When removing a nail which has become stuck in the

nail outlet, first of all make sure to disconnect the

hose and release compressed air inside the power

tool.

Accidental firing of the nail could be very dangerous.

25. A female plug (air socket) should not be used in the

body.

If a female plug is installed in the body, the

compressed air sometimes can not be drawn when

the hose is disconnected so avoid this.

The tool and air supply hose must have a hose

coupling such that all pressure is removed from the

tool when the coupling joint is disconnected.

26. Use only genuine HITACHI heat treated nails for

HITACHI NR65AK.

Use only genuine HITACHI heat treated nails of (8d)

3.3 × 38 mm, (10d) 3.8 × 38 mm, (10d) 3.8 × 64 mm,

(16d) 4.1 × 64 mm for HITACHI NR65AK to avoid

serious injury from ricocheting nails.

NAIL SELECTION

The use of any other nails and non-heat treated nails

could result in dangerous tool malfunction and/or

nail malfunction, causing serious injury.

27. Only for installation purpose of pre-punched holed

metal connector to wood stud.

28. Before each firing, be sure to position and insert the

first nail point through the metal hole.

This tool and nails are designed for metal connector

with pre-punched holes.

Drive nails into work surface only; never into materials

too hard to penetrate.

If the nail is not positioned and insert properly, it

could ricochet and hurt yourself or someone.

If you are not sure to position and insert the nail

through the metal hole, never drive nails.

Never drive nails into metal. Only drive into pre-

punched metal holes.

29. Always point first nail protruded from nose away

from yourself and others.

Keep your face, hands, feet and other body parts, as

well as those of other persons away from the nose

muzzle to avoid possible injury during use and

carrying.

SPECIFICATIONS

Dimensions of nails

(8d) 3.3 × 38 mm (.131 × 1-1/2")

(10d) 3.8 × 38 mm (.148 × 1-1/2" )

(10d) 3.8 × 64 mm (.148 × 2-1/2")

(16d) 4.1 × 64 mm (.162 × 2-1/2")

Paper-collated strip nails Min. Max.

Full-head nails

7.1 mm

(.280")

38 mm (1-1/2")

7.1 mm

(.280")

64 mm (2-1/2")

4.1 mm

(.162")

3.3 mm

(.131")

CAUTIONS:

⅜ Use only genuine HITACHI heat treated nails for this NR65AK to avoid serious injury from ricocheting nails. The

use of any other nails and non-heat treated nails could result in dangerous tool malfunction and/or nail

malfunction, causing serious injury.

⅜ Select adequate nail size to meet proper metal hardware requirement needed for application, designed by metal

hardware manufacturer and regulated by the applicable building code.

Only nails shown in the Table below can be driven with this Nailer.

Type of power Piston reciprocating

Air pressure (Gauge) 4.9 – 8.3 bar (70 – 120 psi.)

Applicable nails ref. Fig.

Numbers of loadable nails 44 nails (2 strips)

Size 460 mm (L) × 360 mm (H) × 108 mm (W) (18-1/8” × 14”–3/16" × 4–1/4”)

Weight 2.9 kg (6.4 lbs)

Nail-feeding method Piston reciprocation

Hose (inside diam.) 8 mm (5/16”)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi NR65AK in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi NR65AK Manual

Product: