568872

Hitachi NR50AK Manual

8
Zoom out
Zoom in
Previous page
1/50
Next page
7
English
work area, moving tool to another location, or after
use. It is very dangerous for a nail to be fired by
mistake.
24. When removing a nail which has become stuck, make
sure to first of all disconnect the hose and release
compressed air.
When removing a nail which has become stuck in the
nail outlet, first of all make sure to disconnect the
hose and release compressed air inside the power
tool.
Accidental firing of the nail could be very dangerous.
25. A female plug (air socket) should not be used in the
body.
If a female plug is installed in the body, the
compressed air sometimes can not be drawn when
the hose is disconnected so avoid this.
The tool and air supply hose must have a hose
coupling such that all pressure is removed from the
tool when the coupling joint is disconnected.
26. Use only genuine HITACHI heat treated nails for
HITACHI NR50AK.
Use only genuine HITACHI heat treated nails of 4.0 ×
40 mm (.157 × 1-9/16") and 4.0 × 50 mm (.157 × 2") for
HITACHI NR50AK to avoid serious injury from
ricocheting nails.
NAIL SELECTION
The use of any other nails and non-heat treated nails
could result in dangerous tool malfunction and/or
nail malfunction, causing serious injury.
27. Only for installation purpose of pre-punched holed
metal connector to wood stud.
28. Before each firing, be sure to position and insert the
first nail point through the metal hole.
This tool and nails are designed for metal connector
with pre-punched holes.
Drive nails into work surface only; never into materials
too hard to penetrate.
If the nail is not positioned and insert properly, it
could ricochet and hurt yourself or someone.
If you are not sure to position and insert the nail
through the metal hole, never drive nails.
Never drive nails into metal. Only drive into pre-
punched metal holes.
29. Always point first nail protruded from nose away
from yourself and others.
Keep your face, hands, feet and other body parts, as
well as those of other persons away from the nose
muzzle to avoid possible injury during use and
carrying.
SPECIFICATIONS
CAUTIONS
⅜ Use only genuine HITACHI heat treated nails for this NR50AK to avoid serious injury from ricocheting nails. The
use of any other nails and non-heat treated nails could result in dangerous tool malfunction and/or nail
malfunction, causing serious injury.
⅜ Select adequate nail size to meet proper metal hardware requirement needed for application, designed by metal
hardware manufacturer and regulated by the applicable building code.
Only nails shown in the Table below can be driven with this Nailer.
Type of power Piston reciprocating
Air pressure (Gauge) 4.9 – 8.3 bar (70 – 120 psi.)
Applicable nails ref. Fig.
Numbers of loadable nails 25 nails (1 strip)
Size 342 mm (L) × 333 mm (H) × 85 mm (W) (13-15/32” × 13-1/8” × 3–11/32”)
Weight 2.4 kg (5.3 lbs)
Nail-feeding method Spiral spring type
Hose (inside dia.) 8 mm (5/16”)
Dimensions of nails
Plastic-collated strip nails
Full-head nails
8.1 mm
(.319")
40 mm (1-9/16")
8.1 mm
(.319")
50 mm (2")
4.0 mm
(.157")
4.0 mm
(.157")
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi NR50AK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi NR50AK in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info