572252
13
Zoom out
Zoom in
Previous page
1/49
Next page
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
After all the available stations are stored, Channel List will
be displayed on the screen. If LCN (*) is available in your
country, a message appears on the screen which asks
you if you want to sort the channels according to LCN.
In some countries, the order of the channels is arranged
automatically by the broadcaster. This is called logical
channel number (LCN). If the selected country has
LCN support, the channels will be enumerated one
by one, beginning from number 1. You cannot move
any programme to a position after the last saved one.
If you try to do this, both programmes will change their
places. If LCN support is not available, you can move
the channels as you wish.
Press OK button to quit channel list and watch TV.
(*) LCN is the Logical Channel Number system that organizes
available broadcasts in accordance with a recognizable
channel sequence.
General operation
Press the SOURCE button on the remote control for
switching between the sources.
Information Banner
Whenever you change channel using the P-/P+ buttons
or the numeric buttons, the TV displays the broadcast
picture along with an information banner at the bottom
of the screen.
The information banner can be displayed at any time
while watching TV by pressing the INFO button on the
remote control ( g.8).
Hint: Not all channels broadcast the programme data. If the
name and time of the programme are not available, then
information banner will be displayed with blanks.
If the selected channel is locked, you must enter the
correct four-digit numeric code to view the channel
(default code is 0000). “Enter PIN” will be displayed on
the screen in such a case.
Getting Started
Initial set up
When turned on for the rst time, the “language selection”
menu appears. The message “Welcome please select
your language!” is displayed in all language options
listed alphabetically as shown below.
Press the “ ” or “ ” button to highlight the required
language, press OK button to select. “First Time
Installation” appears. Use“ ” or “ ” button to set
the required country, and press “ ” button to select
“Teletext Language”. Use “ ” or “ ” button to set
the “Teletext Language” and select “Scan Encrypted”
using “ ” or “ ” button. Set “Scan Encrypted” using
” or “ ” button as shown below.
Press OK button on the remote control to continue and
the following message will be displayed on the screen
as shown below.
To start “Automatic channel scan” select Yes
(to cancel select No), highlight the item required using
the “
” or “ ” button and press OK button to select.
The IDTV will automatically tune to the UHF or VHF
transmission channels, searching for digital terrestrial
and analogue (if available) TV broadcasts.
IMPORTANT: Do not turn off the TV while
“First Time Installation” is in operation.
End of the search process, “Choose Region” osd will be
displayed on the screen (if any multiple region variants
are detected).Please select country and region choice
then press OK to continue.
12
01_MB62_ypbpr_[GB]_IDTV (ARGOS)_BRONZE19_1825UK_26915LED_10076298_5020xxxx.indd 12 14.11.2011 19:55:48
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi L46VF04U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi L46VF04U in the language / languages: English as an attachment in your email.

The manual is 8,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info