572252
11
Zoom out
Zoom in
Previous page
1/49
Next page
For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Getting Started
Aerial connection
Connect the “aerial” or “cable TV” plug to AERIAL
INPUT (ANT.) socket located on the back of the
TV ( g.1).
Switching the TV On and Off
Switching the TV On
With power cord plug connected to the mains power
socket, the TV is in ‘Standby mode.
To switch the TV on from standby mode:
Connect the power cord to the 220-240V AC, 50 Hz.
Then the standby LED lights up. (The led will blink during
the standby On/Off)
To switch on the TV from standby mode either:
a. Press the button, P+ / P- or a numeric button on
the remote control.
b. Press the ”, P/CH- or P/CH+ button of the TV.
By either method the TV will switch on.
AAA/R3 x 2
Batteries
Switching the TV Off
Press the “ ” button on the remote control or press
the “
” switch on the TV, the TV will switch to standby
mode.
To turn off the TV completely, remove the power
cord plug from the mains power socket.
NOTE: When the TV is in standby mode, the standby
LED can blink to indicate that features such as Standby
Search, Over Air Download or Timer are active.
NOTE: If you switch on your TV via P+/- buttons
on the remote control or P/CH+/- on the TV set,
the programme that you were watching last will be
reselected.
g.1
g.2
Power connection
IMPORTANT :The TV set is designed to operate on
220-240V AC, 50 Hz.
Please note: After unpacking, allow the TV to reach
ambient room temperature before connecting the TV
to the mains power socket.
Connect the power cord plug to the mains power
socket.
The LED on the front of the TV then lights up, this
indicates that the TV is in ‘Standby mode.
Remote control - Inserting batteries
Remove the battery cover on the back of the remote
control, gently push down and pull backwards at the
same time as shown.
Insert two AAA/R3 or equivalent type batteries. Ensure
the batteries are inserted the correct way and replace
the battery cover ( g.2).
NOTE: When the remote control is not going to
be used for long periods of time, the batteries should
be removed. Otherwise the remote control may be
damaged, caused by battery leakage and corrosion.
+
+
-
-
Wall Mounting
When wall mounting please ensure you use a compatible
wall mount (not supplied). This TV conforms to the VESA
mounting speci cations and is 600 x 400mm.
Screw size is given on the speci cation page.
10
01_MB62_ypbpr_[GB]_IDTV (ARGOS)_BRONZE19_1825UK_26915LED_10076298_5020xxxx.indd 10 14.11.2011 19:55:45
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi L46VF04U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi L46VF04U in the language / languages: English as an attachment in your email.

The manual is 8,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info