505963
9
Zoom out
Zoom in
Previous page
1/27
Next page
English - 8 -
Main Interface
When the box is switched on from stand-by mode for
the rst time or after rst time installation, the following
menu message will be displayed.
After hard disk initializing process, First Time
Installation Menu window is displayed on the screen.
In this window, set the TV type with “
”/“ ” keys and
press OK to continue.
Then “Do you want to start an automatic channel
scan?” pop-up menu is displayed. Auto search can
be started by selecting the “Yes” button. The box
will automatically nd the channels and store them
for you.
To start installation process, select “Yes”, to cancel
select “No”.
The set-top box will automatically tune to the channels.
You can press the “MENU” button at any time during
the process.
Note : When the search progress is completed, a
message will be displayed on the screen saying
“System will be restarted to save changes”. Please
press OK, and after 3-5 seconds the box will restart.
You can watch saved broadcasts after the restart
process.
Menu System
Main menu is accessed by pressing the MENU key
on the remote control. Navigate with “
”/“ keys
among the menus and press OK to activate menus.
In some sub-menus, press the BACK button to return
to the previous menu, otherwise, use it to exit from
the menu. In all menus there is an Info banner at the
bottom of the screen. These are functions that can be
used in the current menu.
The Main Menu is accessed, pressing the MENU
button. The items accessed through the Main Menu
are:
1.)Channel List
2.)Programme guide
3.)Timers
4.)Recording Library
5.)Setup & Retune
Channel List
Channel list is the place where the channels are
managed. The following operations can be performed
in this menu:
1. Navigating the whole list of channels
2. Deleting unwanted channels
3. Renaming channels
4. Adding locks to channels
5. Setting the favourite list
Channel table is the place where the channels are
managed.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi HDR505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi HDR505 in the language / languages: English as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info