Manual Hitachi HDB60 (page 9 of 25) (English)

505947

Zoom out

Zoom in

1/25

- 8 -

EVERYDAY OPERATION 2

While using the HDB60 receiver to the full there are

great many keys to use in different situations. Many

of the menu screens displayed by the receiver

have reminders as to which keys do what, at the

base of the screen. In addition, many screens have

further help available which is displayed when the

[i] key is pressed, as prompted at the bottom right

of the screen.

Providing your TV set SCART socket has switch

control, pressing the [TV/DTV] key at any time while

watching television programmes will switch the TV

set between displaying the digital terrestrial

television programme and its normal analogue

television reception.

CHANGING CHANNELS

You can select the channel you wish to watch in one

of four ways - stepping through the channel list,

selection by number, from the on-screen channel

list, and using the electronic programme guide

(EPG).

To move through the channel list, press the [P+] or

[P-] keys on the remote control. Pressing the [P+]

key will select the channel next in the channel list.

Pressing the [P-] key will select the previous channel

in the list.

Pressing the [P+] key when the last channel in the

list is being viewed will select the first channel.

Similarly, pressing the [P-] key when the first

channel is displayed will select the last channel in

the channel list.

You can also select the required channel using its

channel list number. Channel numbers are entered

using the number keys on the remote control

handset and can be up to three digits long.

Hint

The channel list numbers are assigned by the

broadcasters. Because not all channels are

broadcast free-to-air and stored by the receiver,

the channel list numbers do not run

continuously. The fifteenth channel in the list,

for example, may not be channel number 15 but

channel number 17.

When you press a number key on the remote

control, a small box appears in the top left of the

screen to show the entered number. After each digit

is entered, the receiver will wait up to two seconds

for the next digit to be pressed until either three digits

have been entered or you do not press a digit in time.

The channel corresponding to the entered number

in the box will then be selected.

Hint

If you enter a number which does not

correspond to a stored channel, the next valid

channel number is selected instead. If you enter

a number greater than the highest numbered

channel in the channel list, the receiver will

select the last channel in the list.

Information Banner

Whenever you change channel, using the [P+] and

[P-] keys or the number keys, the receiver displays

the channel picture along with an information banner

at the bottom of the screen. This will remain on the

screen for approximately three seconds. The

information banner can also be displayed at any

time while watching TV by pressing the [i] key on the

remote control. Pressing the [i] key again removes

the banner.

Hint

Not all channels broadcast the programme

data. If the name and times of the programme

is not available then 'Not available' is displayed

in the information banner.

The information banner gives a number of facts on

the channel selected and the programmes on it. The

name of the channel is displayed, along with its

channel list number and an indication of the strength

of the signal received on this tuning channel.

The name and the start and finish time of the

programme currently showing on the selected

channel are given, and the current time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi HDB60 in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi HDB60 Manual

Product: