Manual Hitachi HDB60 (page 8 of 25) (English)

505947

Zoom out

Zoom in

1/25

- 7 -

PREPARATION 1

SWITCHING ON

Turn on your TV set and select the SCART input (with

the AV key, or similar, on thetelevision remote

control). Turn on the mains supply to the

HDB60

receiver (the indicator on the front of the receiver

will glow red) and press the [STANDBY] key on the

HDB60remote control handset. The indicator light

will glow green and the receiver's menu will be seen

on the TV screen.

If you do not see the receiver's menu on the

television screen, refer to the Troubleshooting Guide

in Appendix E.

TUNING IN

Because this is the first time that the receiver has

been used, there are no channels stored in the

receiver's memory and the First Time Installation

menu is displayed on the screen.

First you should select the type of TV set you have

connected to the HDB60receiver. Press the [LEFT]

or [RIGHT] keys on the remote control handset to

switch the indicator on the screen to show either

16:9, if you have a 16:9 or 'widescreen' TV, or to 4:3

if you have a standard TV set. Then press [SELECT]

to start the installation process. The next menu will

ask if you want to tune in the digital terrestrial

television channels.

Using the [LEFT] or [RIGHT] keys on the remote

control, make sure that the YES button is highlighted

in yellow, and press the [SELECT] key to start the

automatic search.

The HDB60 receiver will automatically tune to the

UHF transmission channels 21 to 68 looking for

digital terrestrial TV broadcasts and displaying the

names of channels found. This process will take

about five minutes.

When the search is finished, the first channel of the

channel list and the information banner is displayed

you can now watch digital terrestrial television,

selecting the channel you require as described in

the next section.

HINT

Depending on the reception conditionsin your

particular area, you may find that the list of

channels found includes one or more repeated

names. This is because the receiver may detect

and store some channels, including those it

cannot receive clearly, from adjacent areas

alongside the strong channels from a

transmitter nearby. This is not a problem and

the weaker channels can be deleted from the

receiver later, as described in Section 3 -

ADVANCED OPERATION - Editing the channel

list.

If no digital terrestrial television broadcasts are

found the receiver will display a message:

You should then refer to the Troubleshooter Guide

in Appendix E to establish the cause of the problem.

When you have finished watching digital terrestrial

TV, you may wish to switch the receiver to standby

to save power - although the

HDB60receiver can

remain powered up continuously, even when the

television is turned off, without harm to the

television or itself. The receiver is returned to

standby by pressing the [STANDBY] key on the

remote control handset.

Hint

In standby, the

HDB60 receiver still consumes

power and thereby contributes to air and water

pollution and the exhaustion of the World's

natural resources. Overnight, or when your

receiver is not going to be used for long

periods of time, you can turn it off at the mains

and this will save energy (and save you money).

You will not have to re-install the receiver when

it is turned on again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi HDB60 in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi HDB60 Manual

Product: