597522
31
Zoom out
Zoom in
Previous page
1/44
Next page
Español
— 31 —
()
Fig. 4
Depósito
Fig. 5
4. Acerca del protector térmico
Este ítem no será necesario si su compresor no
dispone del interruptor de reposición del protector
térmico mostrado en la Fig. 6.
El protector térmico funciona para parar cuando
ocurra algún problema, como sobrecarga del motor,
etc. Si el motor se para durante la operación, realice lo
siguiente.
(1) Ponga la perilla del interruptor de presión en la
posición OFF (Fig. 1) y desconecte el enchufe del
tomacorriente.
(2) Si el cable prolongador no cumple las
especificaciones ofrecidas en la página 26,
reemplácelo por otro como el mostrado en la
página 26. Si la capacidad de la fuente de
alimentación es insuficiente, auméntela para
eliminar la causa de un flujo excesivo de corriente
(sobrecorriente).
(3) Espere aproximadamente 5 minutos, y después
presione el interruptor de reposición del protector
térmico (Fig. 6).
(4) Ponga la herramienta en marcha. Si el motor se
para durante la operación, póngase en contacto
con un centro de reparaciones.
(EC6B)
(EC6C)
(EC12)
(EC16)
Fig. 6
MANTENIMIENTO
ADVERTENCIA:
Antes de realizar las
operaciones de mantenimiento,
desconecte el compresor de la
fuente de alimentación y vacíe
el aire comprimido del depósito
de aire.
1. Limpieza del filtro de entrada
Quite el filtro de entrada (consulte la Fig. 1) cada 50
horas, o una vez a la semana, y limpie el interior del
mismo y de su elemento con aire comprimido (Fig. 7).
Utilice un destornillador Philips para desmontar el
filtro de entrada de los modelos EC6B, EC6C, y EC12.
Utilice una llave Allen para desmontar el filtro del
modelo EC16.
ADVERTENCIA: No limpie nunca el elemento
del filtro con un líquido
inflamable ni con disolvente.
Interruptor de reposición del protector térmico
Interruptor de reposición del protector térmico
Mando del reductor de presión
Mando del disyuntor neumático
Junta
Manómetro
3. Cierre
(1) Gire el mando del disyuntor neumático hasta la
posición “OFF” (Fig. 1).
(2) Desconecte el enchufe del tomacorriente.
(3) Abra el grifo de drenaje situado en la parte
inferior del depósito (Fig. 5).
Grifo de drenaje
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi EC 6B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi EC 6B in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info