635269

Hitachi DV-P788A Manual

11
Zoom out
Zoom in
Previous page
1/22
Next page
–
11
–
EN
RL S-VIDEO INVIDEO IN
VIDEO
OUT
S-VIDEO
OUT
CB/PBYCR/PR
COMPONENT
VIDEO IN
COMPONENT
VIDEO OUT
Analog Audio out Video out
• Method 1 DVD Player + TV with Video Input Jack
• Method 2 DVD Player + TV with S-Video Input Jack
• Method 3 DVD Player + TV with Component Video Jacks
TV
Good pictureBasic Audio Better picture
Best picture
S-Video out
Component
Video out
Video CableAudio Cable S-Video
Cable
NOTES
• S-Video output connector
The video signals are divided into colour (C) and brightness (Y) signals, achieving a clearer picture.
If the TV is equipped with a S-Video input connector, we recommend connecting it to the this product’s S-Video output con-
nector using a commercially available S-Video connection cord.
• Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the
copy protection system.
Selecting Progressive Scan (625p<576p> or Interlaced 625i<576i>) Playback
¡If your TV is compatible with progressive scanning (625p<576p>), connect the TV to the COMPONENT VIDEO OUT jacks
of this DVD player, and set to the progressive scanning mode by pressing PLAY for more than 5 seconds on the front of the
DVD player. “P. SCAN” will appear on display of the DVD player.
¡To set to the interlace mode, press PLAY for more than 5 seconds on the front of the DVD player. “P. SCAN” will disappear
on display of the DVD player.
¡If your TV is not compatible with progressive scanning, keep this DVD player in the interlace mode (Make sure that “P. SCAN”
on display of the DVD player lights off).
¡Use a commercially available adaptor if the video input jacks of your TVs or monitors are the BNC type.
What is Progressive Scanning?
¡Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution
than that of traditional (625i<576i>) television signals.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s
75-ohm coaxial antenna terminal using a commercially available Stereo Audio/Video RF Modulator, not included. Connect
the audio and video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the
coaxial output of the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow
the instruction supplied with the RF Modulator for more details.
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that
cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually
marked “ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above.
NOTE
• The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal
through an RF Modulator.
Connection to a TV (for video)
Method 1 Method 2 Method 3
CONNECTIONS
DVD
Component
Video
Cable
E5918AD(EN).qx3 04.4.2 6:49 PM Page 11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi DV-P788A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi DV-P788A in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info