537846
43
Zoom out
Zoom in
Previous page
1/60
Next page
42
Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is automatically
calculated by the built-in timer. The method of calculating the equivalent lamp hour is as
follows:
Total lamp hour = (hours used in Normal mode) + (hours used in Economic mode) +
(hours used in Intelligent Eco mode)
To obtain the lamp hour information:
1. Press MENU on the projector or MENU/EXIT on the remote control and then press
/ until the SYSTEM SETTING: ADVANCED menu is highlighted.
2. Press to highlight Lamp Settings and press MODE/ENTER on the projector or
remote control. The Lamp Settings page is displayed.
3. You will see the Equivalent lamp hour information on the menu.
4. To leave the menu, press MENU on the projector or MENU/EXIT on the remote
control.
You can also get the lamp hour information on the INFORMATION menu.
Extending lamp life
The projection lamp is a consumable item. To keep the lamp life as long as possible, you
can do the following settings via the OSD menu.
Setting Lamp Mode as Economic or Intelligent Eco
Using Economic/Intelligent Eco mode reduces system noise and power consumption. If
the Economic/Intelligent Eco mode is selected, the light output will be reduced and result
in darker projected pictures.
Setting the projector in Economic/Intelligent Eco mode also extends the lamp operation
life. To set Intelligent Eco mode, go into the SYSTEM SETTING: ADVANCED > Lamp
Settings > Lamp Mode menu and press / .
Setting Auto Power Off
This function allows the projector to turn off automatically if no input source is detected
after a set period of time to prevent unnecessary waste of lamp life.
To set Auto Power Off, go into the SYSTEM SETTING: BASIC > Auto Power Off
menu and press / . If the preset time lengths are not suitable for your presentation, select
Disable. The projector will not automatically shut down in a certain time period.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CP-DX300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CP-DX300 in the language / languages: English as an attachment in your email.

The manual is 3,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info