563799
28
Zoom out
Zoom in
Previous page
1/112
Next page
D
Anbau der Schutzabdeckung
Messerabdeckung
Befestigen Sie die Messerabdeckung am Getriebe mit den vier M6×30 Schrauben wie auf
der Abbildung gezeigt.
Trimmerkopfabdeckung
(Bringen Sie die Schnurschneideklinge und die Verlängerung an der Schutzabdeckung an.)
1. Befestigen Sie die Schnurschneideklinge (B) an der Schutzabdeckung mit zwei M5×25
Schrauben, Unterlegscheiben und Muttern wie auf der Abbildung gezeigt
2. Befestigen Sie die Verlängerung (C) an der Schutzabdeckung mit den fünf M5×15
Schrauben und Muttern wie auf der Abbildung gezeigt.
WARNUNG
MÖGLICHE GEFAHR
• Fremdkörper können durch den Rasentrimmer/Gestrüppschneider in die
Luft geschleudert werden.
WAS PASSIEREN KANN
• Die in die Luft geschleuderten Fremdkörper können Verletzungen
hervorrufen.
WIE DIE GEFAHR VERMIEDEN WIRD
• Benutzen Sie den Rasentrimmer/Gestrüppschneider nur, wenn die
Schutzabdeckung sicher angebaut ist.
WARNUNG
MÖGLICHE GEFAHR
• Die Schnurschneideklinge (B) ist scharf.
WAS PASSIEREN KANN
• Berührung der scharfen Schnurschneideklinge (B) kann Verletzungen
verursachen.
WIE DIE GEFAHR VERMIEDEN WIRD
• Tragen Sie Handschuhe beim Umgang mit der Schnurschneideklinge (B).
27
GB
Installing Guard
Blade Guard
Attach the blade guard to the gearcase with the two M6×30 screws as shown.
Trimmer Head Guard
(Install the string cutoff blade and guard extension to the blade guard.)
1. Fasten the string cutoff blade (B) to the blade guard with two M5×25 screws, lock
washers and hex nuts as shown.
2. Attach the guard extension (C) to the blade guard with the five M5×15 screws, washers
and hex nuts as shown.
WARNING
POTENTIAL HAZARD
• Foreign objects can be thrown by Trimmer/Brushcutter.
WHAT CAN HAPPEN
• Contact with thrown objects can cause personal injury.
HOW TO AVOID THE HAZARD
• Never operate the Trimmer/Brushcutter without the guard in place.
WARNING
POTENTIAL HAZARD
• The string cutoff blade (B) is sharp.
WHAT CAN HAPPEN
• Contact with the sharp string cutoff blade (B) can cause pesonal injury.
HOW TO AVOID THE HAZARD
• Wear gloves when you handle the string cutoff blade (B).
C
B
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CG32EA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CG32EA in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info