563833

Hitachi CG10-DL Manual

15
Zoom out
Zoom in
Previous page
1/96
Next page
English
14
⅜ Trees with luxuriant foliage should be trimmed
starting from the bottom and work up to achieve the
desired shape. (Fig. 21)
Trimming hedges
⅜ Trim the top of hedges by moving the tool from right
to left (or left to right) and trim the sides by starting
from below and working up. (Fig. 22)
NOTE
⅜ Do not use the tool for cutting the lawn or weeds.
Grass or weeds could stick to the blade.
⅜ Cut thick branches by gently pressing the blades
against the branch.
2. Trimming lawns [Grass shear]
CAUTION
⅜ Use only for cutting grass.
⅜ Stop the tool immediately should gravel or branches
enter the blade during trimming and remove the
battery.
Do not allow the motor to seize up as it could damage
the motor. Use a pair of tongs to gently remove
gravel from the blade. To prevent injury, keep hands,
fingers and other body parts away from the blade.
(1) Remove gravel and branches from the lawn to be
trimmed.
(2) Place the blade in the blade cover to prevent accidental
contact.
(3) Install the adjuster when required to adjust trimming
height.
(4) Install the battery in the tool.
(5) Press the Lock Off button and pull the switch to start
trimming.
Place the tool on the lawn and slide the tool forward.
(Fig. 23)
NOTE
⅜ Lubricate (using sewing machine oil, mineral oil, etc.)
the blade before starting and then every hour. Use an
adequate amount of oil and wipe away excess oil.
⅜ During work (for example, when taking rests) do not
leave the tool in a place exposed to direct sunlight or
high temperature. This will prevent proper cooling
and could result in damage.
⅜ Do not use the tool for work that exceeds its capacity.
Such operation could cause the motor to lock up or
slow down and will damage it.
⅜ Do not lower the front end of the blade to prevent
sand, gravel or soil from entering the blade and
damaging it by making it less sharp.
Trimming tall grass
Attempting to cut tall grass at one go will expose the
blade to excessive load and wear the blade. First
remove 1/3 of the height starting from the top before
trimming it to the desired height.
Trimming around stone walls and curbs
When trimming around curbs, move the blade
sideways along the curb. (Fig. 24)
This makes it possible to trim without leaving
untrimmed edges.
3. Continuous operating time
Approx. 30 minutes (depending on the work conditions)
MAINTENANCE AND INSPECTION
WARNING
⅜ Be sure to turn the tool off and remove the battery
from the tool before making inspections or carrying
out maintenance.
⅜ Do not disassemble to blade. Failure to heed this
warning may result in injury.
⅜ Use gloves, or cloth to protect your hands when
handling the blade. Failure to heed this warning may
result in injury.
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
01Eng_CH10DL_WE 9/30/09, 16:0214
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi CG10-DL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi CG10-DL in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info