54279
10
Zoom out
Zoom in
Previous page
1/24
Next page
- 9 -
as you change the language, the menu items will be
displayed in the selected language.
By pressing the
or buttons, come to the
Tuning Mode item and select the mode at which your
TV will run the A.P.S.. If you select Channel Tuning
Mode, A.P.S. will run according to Channel Tuning
Mode and will auto-search according to the Channel
numbers of the stations in your area. If you select Fre-
quency Tuning Mode, A.P.S. will run according to
Frequency Tuning Mode and will auto-search accord-
ing to the frequencies of the stations in your area.
 After selecting the Tuning Mode if you want to start
A.P.S., by pressing the up and down buttons, come to
the Start item and by pressing
 or   button
start the A.P.S..
If you do not want to start A.P.S., you can cancel it by
pressing the TVbutton on your remote control.
When you start A.P.S. the below menu will appear on
the screen.
Operating with the buttons on the TV set
Volume setting and programme selection can be made
using the buttons on the front of the TV.
Volume Setting
Press - button to decrease volume or +
button to increase volume, so a volume level scale
(slider) will be displayed in the lower middle side of the
screen.
Programme Selecting
Press P+button to select the next programme or
-Pbutton to select the previous programme.
Entering MENU
Press MENUbutton to enter the MENU. In the MENU
select sub-menu using -P or P+ button and enter
the sub-menu using -
or +button. To learn
the usage of the menus, refer to the Menu System
section.
Operating with Remote Control
The remote control handset of your TV is designed to
control all the functions of the model you selected. The
functions will be described in accordance with the menu
system of your TV.
Functions of the menu system are described in Menu
System section.
Volume Setting
Press button to increase volume. Press but-
ton to decrease volume. A volume level scale (slider)
will be displayed at the middle of the bottom on the
screen.
Programme Selecting (Previous or next
programme)
Press button to select the previous programme.
 Press
 button to select the next programme.
Programme Selecting (direct access)
Press digit buttons on the remote control handset to
select programmes between 0 and 9. TV will switch to
the selected programme. To select programmes between
10 - 99, you must use the double digit button
- -.
this OSD is displayed at the left hand upper on
this screen.
Press the digit buttons consecutively for the channel
you wish to watch (e.g for channel 27, first press 2 then
7). If you do not press the second digit within 3 sec-
onds of pressing the first, the display will disappear.
28-3217W-1244UK-ENG-ST7P-AK45-BSI-PLL-FS-RF-TILT-CLED-50047944.p65 13.07.2004, 11:259
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi C28WF560N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi C28WF560N in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info