54279
9
Zoom out
Zoom in
Previous page
1/24
Next page
- 8 -
Before Switching on your TV
Power connection
IMPORTANT: The TV set is designed to operate on 220-
240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambi-
ent room temperature before you connect the set to
the mains.
Connections to the RF input socket
 Connect the aerial or cable TV plug to the RF input
socket located at the back of the TV and connect the
cable plug coming out from the TV out socket located
at the devices (VCR, DVB etc.) to this socket as well.
How to connect other devices
IMPORTANT: Switch off the TV before connecting any
external device.
Sockets for external connections are at the back and
front of the TV. For connection of other devices via
Euroconnector refer to the manuals of the related de-
vices.
Inserting batteries in the remote control
handset
Place the batteries in the right directions as seen be-
low.
Remove the battery cover located on the back of the
handset by gently pulling upwards from the indicated
part.
Insert two AAA (R03) or equivalent type batteries in-
side.
Replace the battery cover.
NOTE: Remove batteries from remote control handset
when it is not to be used for a long period. Otherwise it
can be damaged due to any leakage of batteries.
Switching the TV ON/OFF
To switch the TV on
Your TV will switch on in two steps:
1- Press the power button located on the front of the
TV. Then the TV switches itself to standby mode and
the RED LED located below the TV turns on.
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected,
or,
Press Programme Up or Down buttons on the front of
the TV or on the remote control, so that last switched
off programme is selected.
By either method, TV will switch on and the RED LIGHT
will turn GREEN.
To switch the TV off
 Press the stand-by button on the remote control, so
the TV will switch to stand-by mode and the GREEN
LIGHT will become RED,
or,
Press the power button located on the front of the TV,
so the TV will switch off and the GREEN LED will turn
off.
Operating the TV
You can operate your TV both using the remote
control handset and onset buttons.
A.P.S. (Automatic Programming System)
The A.P.S. menu will appear when you first switch on
your TV for the first time.
A.P.S. automatically programmes your TV, according
to the transmission of programme systems in your area.
First come to the Country item and select your coun-
try, according to which the TV will automatically pro-
gram the TV, from the available countries, by pressing
or button.
By pressing the
or buttons, come to the
Language item and select the language in which the
menus of the TV will appear. You can see the available
languages by pressing
or button. As soon
28-3217W-1244UK-ENG-ST7P-AK45-BSI-PLL-FS-RF-TILT-CLED-50047944.p65 13.07.2004, 11:258
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi C28WF560N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi C28WF560N in the language / languages: English as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info