Manual Hitachi C28W433N (page 15 of 32) (English)

54233

Zoom out

Zoom in

1/32

The Speaker Configuration menu allows the user to access various centre speaker modes. This is particularly useful if an external amplifier

is connected to the Centre PHONO Socket. In addition to these options, you may want to replace the TV s internal speaker sound to a full

external amplified speaker setup. In this case the user can mute the TV s speakers from within the Speaker Configuration Menu, allowing

sound only to be heard through the external amplified sound sources. Follow the step by step guide below:

Follow the guide below describing options with and without external amplifiers connected:

Option 1: (PHANTOM) If you do not have any external amplifiers

connected to the TV then select the PHANTOM mode permanently.

Phantom allows the TV to create centre dialogue information using the

TV s left and right internal speakers. (NORMAL and WIDE have no

effect when there are no external centre amplifiers connected [See

Notes below]).

Option 2: (PHANTOM) If there are external surround amplifiers

connected but no centre amplifier connected, then select PHANTO M

mode. This again allows the TV to create centre dialogue information

using the left and right internal speakers.

(NORMAL and WIDE have no effect when there are no external centre

amplifiers connected [See Notes below]).

Option 3: (NORMAL) In option 3, it is presumed the user has a limited

bass response centre amplifier connected. If you feel that this best

describes your setup then select NORMAL. This mode will anchor

dialogue to your centre amplifier whilst relaying bass response through

the TV s internal left and right speakers [See Note below].

Option 4: (WIDE) This option assumes there is a good bass response

centre amplifier connected to your TV. If this option describes your setup

then select WIDE from the Speaker Configuration Menu. In this mode all

bass response and dialogue is fed to the centre amplifier [See Notes

below].

Speaker Configuration Menu

Speaker Configuration Menu - note the displayed

information window, this briefly describes the mode you

have selected.

Press 'MENU' button

to exit

Set

'Centre Channel' option

to PHANTOM

Set

'Centre Channel' option

to NORMAL or WIDE

Do you have an external

CENTRE

Speaker

YES

Select 'Speaker Config.'

using the up/down keys.

Now follow guide below

Do you have external

LEFT and RIGHT

Speakers

YES

Set

'Mute Internal Speakers?'

to off i.e.

Set

'Mute Internal Speakers?'

to on i.e. ✓

Highlight 'Speaker Config.'

using the up/down keys

Select INSTALL using the

right/left buttons

Highlight INSTALL using the

up/down buttons

Use up/down buttons to select

'Dolby Pro Logic'.

Highlight 'Sound Mode' using

the up/down handset buttons.

Select 'Sound Mode' using

the left/right handset buttons.

Press the Menu key

(until Main Menu appears).

De-activate the 3DS system

( see page 14 )

Now press MENU key to exit to

Main Menu

Press & Hold MENU button to view

Main Menu with INSTALLATION.

PLEASE NOTE:

In 2 speaker mode i.e. using only internal TV speakers

with 3DS activated, the CENTRE channel option will

display PHANTOM and cannot be changed to any other

mode.

Whilst in HALL or STEREO modes the Centre Channel

option displays OFF , and also cannot be changed to

any other mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi C28W433N in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hitachi C28W433N Manual

Product: