616686
10
Zoom out
Zoom in
Previous page
1/84
Next page
10
English
CAUTION
1. In the event of liquid leaking from the Back Pack Power
Supply entering the eye, rinse it thoroughly with clean
water without rubbing it, and then contact your doctor
immediately.
Leaving it unattended may result in damage to the eye.
2. In the event of liquid leaking from the Back Pack Power
Supply coming into contact with skin or clothes, rinse it
thoroughly with clean water.
Leaving it unattended may result in skin irritation.
3. In the event of rust, foul odors, overheating or other
abnormalities being apparent when using the Back
Pack Power Supply for the rst time after purchase,
contact your dealer or Hitachi Authorized Service
Center without using it.
4. Store the Back Pack Power Supply in a location out of
reach of children.
5. Use the Back Pack Power Supply in accordance with
the displayed speci cations.
SPECIFICATIONS
BACK PACK POWER SUPPLY
Model BL36200
Battery capacity Li-ion DC 36 V 21 Ah (21000 mAh) 80 cells
Adapter output
Output voltage DC 36 V
Maximum output current 50 A
USB output terminal
Output voltage DC 5 V
Maximum output current
0.5 A
Operating temperature range 0°C – 40°C
Adapter cable length 1.5 m
Large-capacity power dimensions 330 mm × 250 mm × 109 mm
Weight
Large-capacity power 6.3 kg
Power adapter 0.5 kg
Carrier 1.0 kg
CHARGER
Model UC36YRSL
Recharging time
(at an ambient temperature of 20°C)
BSL3620: Approximately 60 minutes
BSL3626: Approximately 80 minutes
BL36200: Approximately 10 hours
Recharge voltage 14.4 V – 36 V
Weight 0.7 kg
STANDARD ACCESSORIES
1 Carrier .......................................................................... 1
2 Recharger: UC36YRSL (with instruction manual) ....... 1
3 Adapte r ......................................................................... 1
4 Arm band ...................................................................... 1
5 Knob bolt ...................................................................... 2
6 M5 screws .................................................................... 4
Standard accessories are subject to change without notice.
APPLICATIONS
Power Supply for Hitachi Cordless Power Tools (DC36V)
Power Supply for USB-Connection Equipment (DC5V).
ASSEMBLING THE BACK PACK POWER
SUPPLY
1. The large-capacity power output cable can be
withdrawn from either side.
Decide on the best side for operations, and then insert
the output cable into the cable groove.
The direction of the cable can be easily amended after
it has been set in position. (Fig. 1)
2. Attach the carrier to the large-capacity power supply
with the four M5 screws supplied with the use of a
Phillips screwdriver.
Tighten the two knob bolts by hand to stabilize the
position of the output cable.
The knob bolts can be removed by hand so that the
direction of the output cable can easily be changed at
any time. (Fig. 2)
3. Pass the carrier strap through the attachment hole on
the large-capacity power supply from the back, and x
it in place in two locations as shown in the illustration.
(Fig. 3)
CAUTION
Check to make sure the M5 screws and knob bolts
for attaching the carrier are not loose. Also check to
con rm that the carrier strap has been rmly attached.
Failure to observe this may result in the Back Pack
Power Supply being dropped, leading to injury or
damage.
4. Pass the switch panel through the rear of the accessory
box and store it in the panel case. (Fig. 4)
5. Align the power connector and adapter connector with
the respective
marks, push them into place and
rotate the rings to secure them. (Fig. 5)
6. If the cable gets in the way, adjust its position with the
waist band or Velcro band. (Fig. 6)
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi BL36200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi BL36200 in the language / languages: All languages as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info