564557
21
Zoom out
Zoom in
Previous page
1/220
Next page
GB-20
Playing Repeatedly (MP3 disc)
ONE, ALB and ALL repeat play can be set by pressing the Mode button (
MODE
).
First press : To repeat the same track, the words “
TRK
and “
REP
” will blink.
Second press : To repeat playing album, the words “
TRK
” will stay lit and “
REP ALB
” will blink.
Third press : To repeat playing all tracks on a disc, the words “
TRK
will stay lit and “
REP ALL
will blink.
Fourth press : To play tracks randomly, the words “
TRK
” will stay lit and “
SHUF
” will blink.
Fifth press : To cancel the repeat playing, the word “
SHUF
” will disappear.
Repeat A-B can be set by pressing the repeat A-B button (
A-B
).
First press : Select the start point, the words “A-” will stay lit.
Second press : Select the end point, the words “A-B” will stay lit.
Third press : To cancel repeat play, the words “A-B” will disappear.
Note: A-B repeat function can only be used within the same track.
Use the USB
By connecting an USB mass storage device (including USB ash
memory, USB ash players or memory cards) to this unit, you can
enjoy the device's stored music through the unit.
1. Insert the USB device's USB plug into the
socket on the
front of unit.
2. Press the USB button (
USB
) on remote control or rotate the
function select button on the Amplier to select the USB
function. The word “USB” will be displayed on the front panel.
3. The device's stored music will be played automatically.
4. When you store more than one folder in the USB ash, use the
a bum up button (
ALB+
) or album down button (
ALB-
) on the
remote control to select the next/previous folder. Then choose
the track with the next button (
G
) or previous button (
H
) to
play the folder.
5.
The player support the USB music le format of MP3, WMA only.
For devices with USB Cables:
1. Insert one plug of the USB cable (not supplied) to the socket on the unit.
2. Insert the other plug of the USB cable to the USB output terminal of the USB device.
For memory Cards:
1. Insert the memory card into a card reader (not supplied).
2. Use a USB cable (not supplied) to connect the card reader into the
socket on the unit.
USB Storage Device Data Protection
Always insert the USB device in the correct direction. Failure to do so may result in damage
to the USB device and this unit.
Do not remove the USB device while it is being accessed.
Electrical interference and electrostatic discharges may cause the USB device to malfunction
and suffer damage, resulting in data loss.
It is strongly recommended that any important data is backed up on a PC to protect against corrup-
tion, data loss or device malfunction. Please note that our company shall not accept any liability for
damage or loss of stored data.
Note: USB connection is not compatible with all hard drive models.
01_AXM649BT_GB_P41013409-A101_20 Mar 13.indd 20 2013-3-20 9:44:23
Downloaded from www.vandenborre.be
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi AXM649BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi AXM649BT in the language / languages: English, Dutch, French, Turkish, Spanish as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info