564557

Hitachi AXM649BT Manual

19
Zoom out
Zoom in
Previous page
1/220
Next page
GB-18
CD Operation
CD Playing
1. Rotate the Function button (
FUNCTION
) on the unit or press the Disc Function button (
CD
) on
the remote control. The word “DISC” will be displayed on the front panel.
2. Press the Open/Close button (
K
) to open the disc door and place the disc on the disc tray (with
the printed side up).
3. Press the Open/Close button (
K
) to close the disc door, the unit will read the disc and play it
automatically.
Note: If in stop mode, please press the Play/Pause button (
BF
) to start playing the disc.
4. Press the Play/Pause button (
BF
) to pause the playing, press again to continue play.
5. Press the Stop button (
L
) to stop the disc playing.
Direct Select track
Load a disc, upon nishing reading the disc, you can select tracks by using number buttons (0-9,10+)
on the remote control and play.
If the song number is less than 10, press the number buttons 0-9.
If the song number is over 10, press the Number button (10+) and press the one of the number
buttons 0-9. Each press of 10+ increases the tens by 1 e.g. 10, 20, 30, so for track ‘22’ press ‘10+’
twice then ‘2’.
To Skip Search and Play
Press the Previous button (
H
) once or more to skip previous one or more tracks on the disc.
Press the Next button (
G
) once or more to skip forward one or more tracks on the disc.
To Search
Press and hold the Reverse button (
D
) or Fast Forward button (
C
) to search for the position
that you intend to start playing.
Text Display During Playback
Press the Display button (
DISPLAY
) to show the current track number and remaining playback time.
Programme Play
You can programme up to 20 tracks to play in any desired order. The player must be in STOP mode
only with a CD inserted.
1. Insert a disc and press the Stop button (
L
) when it starts playing.
2. Press the Programme button
(PROG)
, “
” appears.
3. Press the Number buttons (
0-9, +10
) or the Previous/Next buttons (
H
/
G
) on the remote
control to select the desired track number.
4. Press the Programme button
(PROG)
to conrm the track number to be stored.
5. Repeat steps 3-4 to select and store all desired tracks.
6. Press the Play/Pause button (
BF
) to start programme play.
7. Press the Stop button (
L
) once to stop the programme play. Press the Stop button (
L
) twice to
clear programme.
Note: Random play will not shufe the programmed music list.
Random Play (CD and MP3 discs)
The CD can be played randomly.
Press the Random button (
RANDOM)
once and then press the Previous/Next buttons (
H
/
G
) to
begin the random play.
Playing the Beginning (Intro) of each Track
Press the Intro button (
INTRO
) on the remote control to play the beginning of each track consecu-
tively. The playing time of each track is 10 seconds. When you hear the desired track, press the
Intro button (
INTRO
).
01_AXM649BT_GB_P41013409-A101_20 Mar 13.indd 18 2013-3-20 9:44:22
Downloaded from www.vandenborre.be
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi AXM649BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi AXM649BT in the language / languages: English, Dutch, French, Turkish, Spanish as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info