453432
48
Zoom out
Zoom in
Previous page
1/120
Next page
48
English
C. Presetting stations (using the remote control unit)
20 stations in 2 band FM/MW can be preset
Notes:
The previous stored station is erased when a new station is stored, because the new
stations frequency replaces the previous frequency in memory.
When listening to a MW broadcast, noise may be heard if the remote control unit is
used.
All preset stations will be erased when the power cord is disconnected or a power
failure occurs. In such cases, store the stations again.
D. Frequency step of MW band
To tune to your local MW station, you can select either 9 kHz or 10 kHz as the fre-
quency step. By default, the factory setting for the unit is at 9 kHz step.
To switch to the required frequency step:
1) Make sure the unit is at MW band in TUNER mode.
2) To select 9 kHz frequency step press and hold the BAND button while pressing
)/f button.
3) To select 10 kHz frequency step press and hold the BAND button while pressing
g/( button.
The set will remain at the selected frequency step setting, until item 2 or 3 is pressed
again.
E. RDS Button (using the remote control unit)
Use this button to automatically tune to stations using the radio data system. There
are program type identification (PTY), clock time (CT) and radio text (RT) functions.
DISPLAY
RDS (Radio Data System) When the RDS button is pressed, a station is being
searched for and automatically tuned in. The RDS indicator lights up and the
stations name is displayed on the frequency display.
PTY (Program Type) This indicator lights up when the type of RDS program is
specified.
RT (Radio Text) This lights when the RT mode and the RT message is displayed.
REMOTE CONTROL
CT button
Use this to correct the time of the clock on the AX-M10. Press this
button when the time service of an RDS station is received
correctly. CT ON is displayed for 2 seconds and the AX-M10s
clock is corrected. Press the CT button twice, and CT OFF is
displayed.
The clock can be adjusted manually in CT OFF mode.
RDS button
Use this to automatically tune to stations using the radio data
system.
CT PTY PANEL RDS
046-050(Eng) AX-M10E 7/26/02, 5:19 PM48
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hitachi AX-M10E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hitachi AX-M10E in the language / languages: Dutch as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info